Best current price£3.85from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£3.85Visit shop Finder 40.52.7.012.0000 DC DPDT 12V Relay (Miniature) 8A
Visit shop36 offers from £3.85 - £21.19
View price history by clicking the chart icon.
The Finder 40.52.8.024.0000 is a versatile miniature DPDT relay designed for PCB mounting, ideal for professionals in electronics and industrial automation who need reliable switching capabilities. Its key benefit is the robust 8A switching current and 24V AC coil operation, suitable for a wide range of applications. A potential caveat is its specific AC coil voltage requirement, necessitating compatible power sources.
| Series | 40 Series |
|---|---|
| Model Part Number | 40.52.8.024.0000 |
| Brand | Finder |
The coil requires a 24V AC (alternating current) voltage.
The relay can switch a maximum of 8A.
No, this specific model is designed for AC coil voltage and AC switching. It is not suitable for DC circuits.
It features a DPDT (Double Pole Double Throw) configuration, meaning it has two sets of change-over contacts.
The relay operates reliably in temperatures ranging from -40°C to +85°C.
No, this relay is designed specifically for PCB mounting and requires soldering onto a circuit board. It does not support DIN rail mounting directly.
The relay has an IP20 rating, indicating protection against solid objects larger than 12.5mm but no protection against water.
Verify the coil voltage is exactly 24V AC. Check for correct polarity if applicable to the control circuit. Ensure the coil terminals are properly soldered to the PCB. Measure coil resistance to check for opens.
Ensure the load current and voltage do not exceed the relay's maximum switching capacity (8A, 400V AC, 2 kVA). Check for arcing caused by switching inductive loads; consider adding snubbers if necessary. Inspect contacts for physical damage.
Check for dry solder joints on the PCB. Ensure the relay is operating within its specified temperature range (-40°C to +85°C). Vibrations might affect performance; secure the PCB if necessary.
Setup: This relay is designed for PCB mounting and requires soldering to secure it to the board. Ensure correct orientation as per the datasheet. The coil is rated for 24V AC, so connect the appropriate AC power source to the coil terminals. The contact terminals are rated for up to 400V AC and 8A switching current.
Compatibility: Compatible with standard 24V AC control circuits. It is not suitable for DC control voltages. Ensure the connected load does not exceed the 8A switching current or 2 kVA switching power.
Care: Keep the relay clean and free from excessive dust or moisture, especially given its IP20 rating. Avoid exposing it to harsh chemicals. Periodically check solder joints for integrity. It operates reliably within a temperature range of -40°C to +85°C.
