JIG1 Door Lock Mortiser Kit - IVhomeshop - JIG1
Best current price£61.25from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£61.25Visit shop JIG1 Door Lock Mortiser Kit 18mm 22mm 25mm Fitting Jig Maintenance Set...
Visit shopeBay£61.25Visit shop All Offers
2 offers from £61.25 - £62.54
View price history by clicking the chart icon.
eBayJIG1 Door Lock Mortiser Kit 18mm 22mm 25mm Fitting Jig Maintenance Set...
Free delivery in 1–3 days
£61.25
Visit shop
OnBuy.comJig1 Door Lock Mortiser Kit 18Mm 22Mm 25Mm Lock Fitting Jig Maintenance Set Woodworking Hole Saw Opener Installation Mortising Jig Tool 766008353318
Free delivery in 1–3 days
£62.54
Visit shop
Product Information
Full details
The IVhomeshop JIG1 Door Lock Mortiser Kit is designed for DIY enthusiasts and locksmiths needing to accurately cut mortises and faceplates for door locks and hinges. Its primary benefit is providing fast, precise cuts on doors of varying thickness using a standard power drill. A potential consideration is its suitability primarily for woodworking applications, not heavy-duty construction.
All features
| Model Part Number | JIG1 |
|---|---|
| Brand | IVhomeshop |
Extended Product Information
FAQs
What is the maximum door thickness the JIG1 can accommodate?
The JIG1 is designed to work with doors ranging from 30mm to 55mm thick.
What size cutters are included in the kit?
The kit includes three carbide cutters: 18mm, 22mm, and 25mm.
Do I need a special type of drill to use this mortiser?
No, the JIG1 is designed to be used with any standard power drill.
Can this kit be used for mortising hinges?
Yes, the JIG1 can be used to cut mortises for door hinges, as well as strike plates and electric releases.
How does the jig ensure the cut is centered?
The JIG1 features a self-centering mechanism that automatically aligns the jig with the edge of the door, ensuring accurate placement.
What should I do if the cut is too deep or not deep enough?
You can adjust the depth stop on the jig to control how deep the mortise is cut. Ensure the stop is securely locked in place after adjustment.
How do I maintain the carbide cutters?
Keep the cutters clean and dry. For best performance, have them professionally sharpened when they become dull, or replace them if damaged.
Troubleshooting
Jig does not center properly on the door edge.
Ensure the door edge is relatively square and free of major obstructions. Check that the jig's centering guides are clean and not obstructed.
Cutter is not cutting cleanly.
Verify the cutter is securely attached to the drill and is spinning at an appropriate speed. Check if the carbide cutter is dull or damaged and needs sharpening or replacement.
Depth or height stops are not holding their position.
Ensure the locking mechanisms for the stops are tightened properly. Clean any debris that might be preventing them from locking securely.
Drill bit is wobbling during operation.
Confirm the drill bit is correctly inserted into the drill chuck and that the chuck is tightened firmly. Ensure the drill bit is centered within the jig's guide bushing.
Pros and Cons
Pros
- Ensures precise and repeatable mortise cuts.
- Suitable for a wide range of standard door thicknesses.
- Comes with multiple cutter sizes for different lock types.
- Self-centering mechanism simplifies alignment.
- Carbide cutters provide a clean finish, reducing post-cut work.
Cons
- Requires a power drill, adding to the necessary tool investment.
- Primarily designed for mortises, not for making larger frame cuts.
- Can be bulky to store when not in use.
- Learning curve to master depth and height adjustments for perfect fit.
- Carbide cutters, while sharp, can still chip if used improperly on very hard materials.
Setup, Compatibility & Care
Setup:
- Ensure the door is securely fixed and will not move during operation.
- Attach the appropriate carbide cutter (18mm, 22mm, or 25mm) to your power drill.
- Position the JIG1 onto the edge of the door, allowing the self-centering mechanism to engage.
- Use the integrated clamp to secure the jig firmly to the door edge.
- Adjust the height and depth stops according to the dimensions of the lockset or hardware you are installing.
- Connect the drill with the cutter into the jig's guide and perform the cut.
Compatibility:
- Compatible with most standard power drills.
- Suitable for doors ranging from 30mm to 55mm in thickness.
- Can be used for mortising locks, hinges, strike plates, and electric releases.
Care:
- After use, remove any wood debris from the jig and cutters.
- Store the jig and cutters in a dry place to prevent rust or damage.
- Periodically check the sharpness of the carbide cutters; sharpen or replace as needed.
- Wipe down the metal components with a lightly oiled cloth if stored for extended periods.