NGT Auto Water Tap - USB Rechargeable, Folding Nozzle, Timer Buttons

A full charge typically provides power for numerous dispensing cycles over several days of typical use. Actual duration depends on usage frequency and duration of dispensing.

The product is designed for cold or ambient temperature water. Using boiling water is not recommended as it may damage the internal components or pose a safety hazard.

It is compatible with most standard water carriers and bivvy sinks that have a suitable spout opening for a secure attachment.

The dispensing performance may decrease when the battery is low. It is best to recharge the unit fully before extended trips or when you notice a significant drop in flow rate.

Yes, the tap facilitates hygienic dispensing by allowing hands-free operation and controlled water flow from your clean water carrier. Regular cleaning of the nozzle is recommended.

The timer buttons provide pre-set durations for water flow. These specific durations are fixed and cannot be user-adjusted.

Ensure the tap is fully charged. Check that the water carrier is sufficiently full and that the tap is securely attached to prevent airlocks. Make sure the nozzle is not blocked.

The tap may not be securely fastened to the water carrier. Remove and reattach, ensuring a tight seal. Check the water carrier's spout for any damage or debris that might prevent a good seal.

The battery may be low; recharge the unit. Check the water source for any sediment or blockages within the carrier or the tap's intake. Ensure the water carrier itself is not collapsing under vacuum.

Ensure the device is switched on. If the issue persists, try recharging the unit completely. Contact customer support if the problem continues.