Best current price£4.19from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£4.19Visit shop (5Mm X 110 Mm) Sds+ Masonry Drill Bit For Brick Stone Concrete Reinforced Stone Professional Gr 5061098944497
Visit shop
B&Q£4.39Visit shop B&Q - Sds+ Masonry Drill Bit For Brick Stone Concrete Reinforced Stone Professional 5mm X 110 mm
Visit shop3 offers from £4.19 - £4.39
View price history by clicking the chart icon.
The GTV SDS+ Masonry Drill Bit is engineered for professional tradespeople and serious DIY enthusiasts who require precision and speed when drilling into brick, stone, concrete, and reinforced concrete. This 5mm x 110mm tool delivers exceptional durability for demanding masonry applications, though it is exclusively compatible with rotary hammer drills featuring an SDS-plus chuck system and cannot be used in standard chuck drills.
| Brand | GTV |
|---|
No, this bit requires an SDS-plus rotary hammer drill chuck.
This bit is designed specifically for masonry, brick, and concrete. It will not perform well on wood.
The bit has a 5mm diameter and a total length of 110mm.
Yes, it is designed for use in reinforced concrete, though hitting thick steel rebar may shorten the bit's life.
Store in a dry place to prevent rust. Using an oil-based rust preventative spray on the shank can help maintain the locking mechanism.
Verify your drill uses an SDS-plus chuck system. This bit is not compatible with standard three-jaw drill chucks.
Ensure the drill is set to 'hammer' mode. Rotary hammer drills require the percussion setting to break through concrete effectively.
Check that the bit is fully seated and locked in the chuck; if the shank is worn, replace the bit to prevent chuck damage.
To install, simply pull back the locking collar on your SDS-plus rotary hammer chuck, insert the bit shank until it clicks, and release the collar. Ensure the bit is locked before starting the drill. Regarding compatibility, this bit will not function in a standard drill with a twist-to-tighten chuck. To prolong the life of the bit, remove it periodically during long sessions to clear concrete dust from the flutes, and avoid overheating by dipping the tip in water if drilling through especially hard or abrasive stone.
