Sculpey III 2oz - Ballerina

Bake Sculpey III at 275°F (130°C) for 15 minutes per 1/4 inch (6mm) of thickness. Always use an oven thermometer for accuracy.

No, Sculpey III cannot be microwaved. It must be baked in a conventional oven.

Store unused clay in its original packaging or an airtight container in a cool place away from direct sunlight and heat to keep it soft and workable.

Adult supervision is required for children, especially during the baking process. However, the clay itself is non-toxic and easy for them to mold.

After baking, Sculpey III can be sanded, carved, drilled, painted with acrylics, or glazed for a customized finish.

No, Sculpey III remains soft and pliable until it is baked. You can work on projects over several sessions without the clay hardening.

Once baked, projects can be wiped clean with a damp cloth. For more detailed cleaning or if you've applied finishes, follow the care instructions for those specific mediums (e.g., paints, glazes).

Gently warm the clay in your hands by kneading it. If very stiff, you can try placing it in a plastic bag and setting it on a warm (not hot) surface for a short period. Avoid overheating.

Ensure you are not overworking it. If it feels too soft, try chilling it slightly or adding a small amount of cornstarch or talcum powder to your work surface (use sparingly).

This can happen if the clay is too thin, the oven temperature is too high, or baking time is too long. Ensure consistent thickness and adhere strictly to recommended baking times and temperatures. Small cracks can often be repaired with glue or more clay before final finishing.

The oven temperature may be too high or the baking time too long. Use an oven thermometer to verify your oven's temperature. Reduce baking time or temperature as per instructions.

This often happens when colors are placed next to each other for too long before baking, especially if the clay is warm. Ensure clean hands and tools when switching colors. Use wax paper or parchment paper to separate colors if needed during the process.