Solder Ring 90° Pipe Elbow (Dia)8mm - B&Q
Best current price£2.84from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£2.84Visit shop - Solder Ring 90° Pipe Elbow (Dia)8mm
Visit shopB&Q£2.84Visit shop One Offer
1 offer from £2.84
View price history by clicking the chart icon.
Product Information
Full details
This guide is for DIYers and professional plumbers looking for a reliable and cost-effective way to create secure pipe joints. The B&Q Plumbsure Solder Ring 90° Pipe Elbow offers a durable solution with pre-fitted lead-free solder for simplified installation. A key benefit is the ease of creating strong joints by simply heating the fitting. However, users must ensure copper pipes are properly prepared with a cleaner and flux before soldering for optimal results.
All features
| Brand | B&Q |
|---|
Extended Product Information
FAQs
What type of solder is used in the fitting?
The Plumbsure Solder Ring fittings use a high-quality, lead-free solder.
Do I need to supply my own solder?
No, each fitting comes with a pre-fitted ring of solder, so no additional solder is required.
What tools do I need to use this fitting?
You will need a blow torch (propane or MAPP gas), a pipe cleaner for the copper pipe, and soldering flux.
Can I use this fitting with plastic pipes?
This fitting is designed specifically for use with copper piping.
How do I ensure a strong joint?
Ensure the copper pipe ends are perfectly clean and fluxed, insert the pipe fully into the fitting, and heat the fitting evenly until the solder flows completely around the joint.
What is the main advantage of using a solder ring fitting?
The main advantage is the convenience and consistency provided by the pre-fitted solder, simplifying the soldering process and reducing the chance of errors.
What size pipes is this elbow designed for?
This specific elbow is designed for 8mm diameter copper pipes.
Troubleshooting
Joint is not sealing / Leaking after cooling
Ensure pipes were thoroughly cleaned and fluxed before insertion. Check that the fitting was heated evenly and sufficiently for the solder to flow completely. Avoid disturbing the joint while it cools.
Solder not flowing or appears patchy
The fitting may not have been heated enough, or the heat was not applied evenly. Try reheating the fitting more thoroughly, ensuring the heat is distributed around the body of the fitting.
Fitting is overheating, causing damage or excessive flux burn-off
Reduce the heat intensity or the duration of heating. Move the torch flame more rapidly around the fitting to distribute heat and prevent localized overheating.
Difficulty inserting pipe into fitting
Ensure the pipe ends are not deformed and are clean. Slight reaming of the pipe end might be necessary if there is any resistance.
Pros and Cons
Pros
- Easy to use, especially for DIYers.
- Pre-fitted solder speeds up the installation process.
- Creates strong and reliable pipe joints.
- Cost-effective compared to other jointing methods.
- Durable construction ensures longevity.
Cons
- Requires a blow torch and preparation materials (pipe cleaner, flux).
- Copper pipes must be properly cleaned and fluxed for best results.
- Not suitable for all pipe materials; designed primarily for copper.
- Requires careful temperature control during heating to avoid overheating or insufficient solder flow.
- Can be challenging to work with in confined spaces.
Setup, Compatibility & Care
Setup:
- Ensure the ends of the 8mm copper pipes are clean and free from oxidation using a pipe cleaner.
- Apply a thin, even layer of appropriate flux to the cleaned ends of the copper pipes.
- Insert the fluxed pipe ends fully into the Solder Ring 90° Pipe Elbow fitting.
- Using a propane or MAPP gas blow torch, heat the fitting evenly. Concentrate the heat on the body of the fitting, not directly on the solder joint if visible.
- Once the fitting reaches the correct temperature, the internal solder ring will melt and flow, creating a joint. Continue heating briefly until the solder has flowed around the pipe.
- Remove the heat and allow the joint to cool undisturbed.
Compatibility:
- Primarily designed for use with 8mm copper pipe.
- Requires a blow torch (propane or MAPP gas recommended) and solder flux.
Care:
- Once installed, the fitting requires no specific maintenance. Ensure regular system checks for any potential leaks or issues as part of general plumbing upkeep.