Shooting Star LED Hanging Decoration - White

This decoration requires 3 x D batteries. These are not included with the product.

Yes, this decoration is IP44 tested and suitable for outdoor use. However, it's recommended to protect the battery box from direct exposure to heavy rain.

Once activated, the timer will keep the lights on for 6 hours, then automatically switch them off for 18 hours. The cycle repeats daily. Ensure the unit is switched to the timer setting for this function.

The star has a diameter of 25cm. Each of the 4 light strands is 200cm (2m) long.

The LEDs are warm white, with a color temperature of approximately 2500 K.

The cable connecting the star decoration to the battery box is 5 meters long.

Gently wipe the star and light strands with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaning materials.

Ensure 3 new D batteries are inserted correctly, paying attention to polarity. Check that the battery compartment is securely closed. Make sure the unit is switched to the 'on' position for the timer or manual operation.

The batteries may be low. Replace all 3 batteries with new ones. Ensure the battery contacts are clean.

Verify the unit is switched to the timer setting. Ensure the batteries are fresh, as low power can affect timer accuracy. The timer operates on a 6-hour on, 18-hour off cycle.

Confirm the battery box is adequately protected from direct rain or excessive moisture, even though the light itself is IP44 tested. Ensure all seals on the battery compartment are intact.