Best current price£18.02from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.02Visit shop B&Q - Glue Precision Max 10G (5 Pack)Fast-Acting Clear Strong Adhesive With Precision Nozzle For Accurate Diy Repairs
Visit shop3 offers from £18.02 - £23.62
View price history by clicking the chart icon.
This 5-pack of Loctite Precision Max Glue is for DIY enthusiasts, crafters, and anyone needing fast, strong, and precise bonding for various materials. Its key benefit is the mess-free, controlled application for intricate repairs, though users should be aware that cyanoacrylate adhesives require careful handling and can bond skin instantly. This product offers maximum strength, a precision nozzle for accuracy, fast-acting adhesion, and a clear finish in a convenient, value-oriented pack.
| Colour | White |
|---|---|
| Brand | Loctite |
Loctite Precision Max Glue is fast-acting and bonds in seconds once the surfaces are brought together with applied pressure.
It is suitable for bonding plastic, wood, metal, rubber, leather, ceramic, and general household materials. Always test on a small, inconspicuous area first if unsure.
Keep the cap securely on the nozzle to prevent drying. Store tubes in a cool, dry place away from direct sunlight.
While it can bond rubber, extreme flexibility or constant movement may weaken the bond over time. It is best suited for rigid materials or applications with minimal flex.
Do not pull bonded skin apart. Soak the affected area in warm, soapy water and gently flex and peel. For persistent bonds, a small amount of acetone can be used on the skin, followed by thorough washing.
The adhesive creates a strong bond that is resistant to water once fully cured, making it suitable for many general household repairs.
Unopened tubes typically have a long shelf life when stored correctly. Once opened, it is best to use the glue within 6-12 months, ensuring the cap is always replaced securely after use.
Ensure the nozzle is not clogged. If dry, try to carefully clear it with a pin. Check that the cap has been fully removed.
Ensure surfaces were properly cleaned and dried before application. Verify that the materials are compatible with cyanoacrylate adhesive. Apply sufficient pressure during bonding.
Do not pull bonded skin apart. Soak in warm, soapy water, gently flex and peel. For stubborn bonds, a small amount of acetone (nail polish remover) can be used on skin, followed by washing. For surfaces, use acetone carefully if the material can tolerate it, or gently scrape away cured adhesive.
This can occur with over-application or 'blooming' in humid conditions. Apply sparingly and allow adequate ventilation. Ensure surfaces are completely dry.
Setup: Ensure surfaces to be bonded are clean, dry, and free from dust, grease, or oil. For best results, lightly abrade non-porous surfaces. Remove the cap carefully; the precision nozzle is ready for use. Always test on an inconspicuous area first if unsure about material compatibility.
Compatibility: This adhesive is suitable for a wide range of materials including, but not limited to: plastics, wood, metal, rubber, leather, ceramic, and general household materials. Avoid using on polyethylene, polypropylene, Teflon, or painted surfaces where paint may be removed. Not recommended for use on fabrics or paper, as it may soak through.
Care: Store tubes in a cool, dry place, away from direct sunlight. Keep the cap securely on the nozzle when not in use to prevent drying out. Clean any excess uncured adhesive immediately with a dry cloth. Cured adhesive can be carefully removed by soaking in acetone or by mechanical means (scraping), though this may damage the substrate. Ensure adequate ventilation during application and drying.
