JB Kind Doors Montserrat White Internal Fire Door - 1981 x 610mm

No, this is a door slab and is not pre-hung. It requires fitting into an existing or new door frame by a qualified installer.

Standard internal door hardware such as hinges, handles, and latches are compatible. For FD30 fire doors, ensure all hardware is rated appropriately and installed according to fire safety regulations.

Minor trimming may be possible, but it is essential to consult the manufacturer's guidelines regarding trimming limits, especially for fire-rated doors, as it can affect the fire resistance and structural integrity.

Ensure the door is clean and dust-free. Apply a good quality primer, followed by at least two coats of your chosen paint, allowing sufficient drying time between each coat for a smooth, durable finish.

FD30 signifies that the door has been tested and certified to provide fire resistance for a minimum of 30 minutes.

The exact dimensions are 1981mm (height) x 610mm (width) x 44mm (thickness).

The 15-year guarantee typically covers manufacturing defects and structural integrity. Issues arising from improper painting or wear and tear are usually not covered.

Check if the door has been trimmed unevenly, if hinges are loose or misaligned, or if the frame has warped. Minor adjustments to hinges or the frame may be needed.

Ensure the door was properly prepared and primed before painting. Use thin, even coats of paint and allow adequate drying time between layers. Avoid over-saturating the surface.

This is a characteristic of solid core doors, which are designed for durability and insulation. The sound is normal and indicates the solid construction.

Verify that the installation strictly followed all guidelines for FD30 doors, including correct hardware, seals, and frame fitting as per the relevant certification. Contact a professional if unsure.