11Pc Holesaw Kit - BARGAINS-GALORE

This kit is designed for cutting wood, plasterboard, and thin sheet metal. It is not recommended for use on hard metals, masonry, or thick steel.

The maximum cutting depth for this holesaw kit is 25 mm.

The holesaws come with a protective oil coating. After use, clean them thoroughly and reapply a thin layer of oil if needed, then store them in the case.

Yes, the pilot bits are attached to the arbors and can be removed. Replacement arbors with pilot bits are included in the kit.

The kit includes 8 carbon steel hole saws in the following sizes: 19mm, 22mm, 29mm, 32mm, 38mm, 44mm, 51mm, and 64mm.

Yes, the 11-piece holesaw kit includes a durable blow-moulded storage case for organization and protection.

The kit is compatible with standard drills that have a 1/4" or 3/8" chuck, which is where the included arbors attach.

Ensure the saw teeth are sharp. Clean any debris from the teeth. Check that the drill is set to an appropriate speed (lower speeds for denser materials) and is not wobbling. Verify you are using the correct holesaw for the material.

Confirm you are using the correct arbor size (1/4" or 3/8") for your drill's chuck. Ensure the drill chuck is fully opened to accept the arbor shank and then tightened securely.

Slow down your drilling speed and use a steady, consistent pressure. For wood, consider using a lubricant like wax or cutting fluid. Ensure the holesaw is not binding in the material.

Gently twist the holesaw backward slightly after completing the cut to loosen the material. Some kits include a small slot for a screwdriver to help eject the core.