Best current price£26.90from eBay
Shopping.co.uk recommended and popular offers
eBay£26.90Visit shop Ace W4 Inox T-Bolts 48-51mm - ACE4047
Visit shop
B&Q£33.54Visit shop B&Q - W4 Inox T Bolt 48-51mm Aisi 304 Stainless Steel Hex Head Pack Of 5
Visit shop2 offers from £26.90 - £33.54
View price history by clicking the chart icon.
The W4 Inox T-Bolt clamps are ideal for automotive, agricultural, and engineering professionals who require high-strength fastening solutions for pressurized hose assemblies. These 48-51mm stainless steel clamps provide superior clamping force compared to standard worm-gear clamps, ensuring leak-free connections in demanding environments; however, users should verify their specific hose outer diameter to ensure the 48-51mm range provides the necessary compression for their specific application.
| Model Part Number | ACE4047 |
|---|---|
| Brand | Van Line |
Yes, the 304 stainless steel construction and T-bolt design allow these to be loosened and re-tightened multiple times.
While structurally capable, ensure the clamp range is correct for your fuel hose OD to ensure a liquid-tight seal.
A standard metric socket, nut driver, or wrench with a 6mm head size is sufficient.
Being 18/8 (304) stainless steel, it is highly resistant to corrosion but can still show surface oxidation in extreme salt environments.
No, this clamp is specifically sized for 48-51mm. Attempting to use it on a smaller hose will result in the clamp bottoming out before achieving a secure seal.
Ensure the clamping surface of the hose and pipe is clean and free of oil or debris, then increase tightening torque incrementally.
Check the threads for debris and apply a small amount of anti-seize or thread lubricant to the bolt.
To install, loosen the 6mm nut until the T-bolt can be opened, place the clamp around the hose, and insert the bolt back into the swing-arm trunnion. Tighten by hand first, then use a socket or wrench to reach the desired torque.
*Compatibility:* These clamps are designed for hoses with an outer diameter (OD) between 48mm and 51mm.
*Care:* While made of 304 stainless steel, avoid using these in direct salt-water spray without occasional cleaning. Use an anti-seize lubricant on the bolt threads if the clamp is intended for frequent removal, which prevents stainless steel galling.
