Best current price£99.24from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£99.24Visit shop Clarke 7236070 Psd1a 1 Stainless Steel Clean Water Submersible Pump
Visit shop
B&Q£122.42Visit shop B&Q - Clarke Psd1A 800W 91Lpm 30M Submersible Head Stainless Steel Clean Water Pump With Float Switch (230V)
Visit shop3 offers from £99.24 - £122.42
View price history by clicking the chart icon.
The Clarke International Clean Water Submersible Pump is designed for homeowners and garden enthusiasts needing to move clean water efficiently. Its key benefit is a powerful 800W motor delivering a 30m maximum head height and 91 liters per minute flow rate, ideal for fountains, waterfalls, garden irrigation, and draining various water sources. A potential caveat is its suitability primarily for *clean* water, meaning debris can cause issues.
| Model Part Number | PSD1A |
|---|---|
| Brand | Clarke International |
This pump is designed specifically for clean water. It is not suitable for water containing sand, silt, mud, or other abrasive materials.
The float switch is designed to automatically turn the pump on when the water level reaches a certain height and turn it off when the water level drops below another point. This allows for unattended operation and prevents the pump from running dry.
The product information does not specify a maximum submersion depth, but it is designed as a submersible pump for typical applications like ponds, pools, and flooded areas.
No, this model is strictly for clean water applications. Using it with dirty water or sewage can lead to blockages and damage the pump.
The pump features an 800W induction motor.
The pump has a 1" BSP threaded outlet, so a 1-inch discharge pipe or hose fitting is required.
Regularly check the intake for debris and clean the float switch if it becomes fouled. Ensure the power cord is in good condition and store it properly when not in use.
Check that the pump is correctly plugged into a live 230V power outlet. Ensure the float switch is not stuck in the 'off' position and has adequate water level to activate.
Verify that the intake screen is clear of debris. Check the discharge hose for kinks or blockages. Ensure the head height does not exceed the pump's maximum rating.
This may indicate a blockage in the intake or discharge, or the float switch is set too high, causing the pump to short-cycle. Clear any obstructions and adjust the float switch position if necessary.
Check for airlocks in the discharge line. Ensure the pump is fully submerged. Confirm the discharge outlet is not blocked and the head height is within operational limits.
Setup:
Compatibility:
Care:
