Shopping.co.uk

Galfer Wave Brake Disc - Laverda 650 BlackStrike 1998-1999 - Front

Galfer Wave Brake Disc - Laverda 650 BlackStrike 1998-1999 - Front

The Galfer Wave Brake Disc is a premium aftermarket replacement rotor designed for high performanc...

Best current price£226.49from GhostBikes.com

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
GhostBikes.com£226.49Visit shop

Galfer Df660cw - Wave Brake Disc For Laverda 650 Blackstrike 1998-1999 - Front

Visit shop

One Offer

1 offer from £226.49

View price history by clicking the chart icon.

GhostBikes.comGalfer Df660cw - Wave Brake Disc For Laverda 650 Blackstrike 1998-1999 - Front
Free delivery in 1–3 days
£226.49
Visit shop

Product Information

Full details

The Galfer Wave Brake Disc is designed for Laverda 650 BlackStrike (1998-1999) owners seeking an upgrade in stopping power and thermal management over stock components. This premium, full-floating rotor offers exceptional heat dissipation and consistent feedback, making it ideal for performance-oriented riders; however, it requires a precise break-in period to ensure optimal pad-to-disc bedding.

All features

Model Part Number17103855
BrandGalfer

Extended Product Information

FAQs

Does this disc come with mounting hardware?

No, this listing is for the rotor only. It is recommended to inspect your existing bolts for wear or replace them with new hardware if they show signs of fatigue.

Can I use my old brake pads with the new disc?

While technically possible, it is strongly recommended to install new brake pads to ensure the new rotor beds in correctly and achieves maximum performance.

Is this a front or rear rotor?

This specific part (MPN 17103855) is designed for the front wheel of the Laverda 650 BlackStrike.

How long does the bedding-in process take?

Usually, 50 to 100 miles of moderate city riding is sufficient, avoiding extreme hard stops during this initial period.

What makes the 'wave' design better?

The wave profile increases the surface area for cooling and helps clear dust and moisture from the pads, improving bite and modulation.

Troubleshooting

Brake judder or pulsation after installation

Check that the rotor mounting surface on the wheel hub is clean and free of debris. Ensure all bolts are torqued evenly to factory specs.

Excessive squealing during light braking

Ensure the anti-rattle clips are correctly seated in the caliper and apply a small amount of brake pad contact grease to the back of the pads.

Pros and Cons

Pros

  • Superior heat dissipation compared to stock rotors
  • Lightweight aluminum carrier reduces unsprung weight
  • High-quality construction prevents thermal warping
  • Precise direct-fit installation with no modifications needed

Cons

  • Requires professional installation to ensure safety
  • Must be bedded-in properly with new pads
  • Higher initial cost than entry-level aftermarket discs

Setup, Compatibility & Care

This brake disc is a direct replacement for the Laverda 650 BlackStrike (1998-1999) front wheel.

Installation Steps

  1. Secure the motorcycle on a stable paddock stand to elevate the front wheel.
  2. Remove the brake calipers and the front wheel assembly.
  3. Unscrew the original rotor bolts using a high-quality hex or Torx tool.
  4. Clean the hub mounting surface thoroughly, ensuring no debris remains.
  5. Mount the Galfer Wave disc and torque the mounting bolts to the manufacturer's recommended specification using a calibrated torque wrench.
  6. Reinstall the wheel and calipers, ensuring proper alignment of the brake pads.

Maintenance Tips

  • Always replace brake pads when installing a new rotor to ensure even mating surfaces.
  • Perform a proper bedding-in cycle (typically 10-15 moderate stops from medium speed) before heavy braking.
  • Regularly clean the rotor surface with specialized brake cleaner to remove road grime and oil.

Price History

DatePrice
Visit shop