Best current price£39.99from eBay
Shopping.co.uk recommended and popular offers
eBay£39.99Visit shop Bosch Multimaterial Circular Saw Blade 216 x 30 x 80T 2608640447
Visit shop8 offers from £39.99 - £52.27
View price history by clicking the chart icon.
This Bosch PRO Multi Material Circular Saw Blade is designed for professionals and serious DIYers who need to cut a variety of materials with a single blade, including aluminium, non-ferrous metals, plastics, and wood. Its key benefit is versatility, allowing for seamless transitions between different material types. A potential caveat is the specialized nature of the 80-tooth count, which is optimized for finer cuts on softer materials and may require more effort on very dense hardwoods compared to a blade with fewer teeth.
| Model Part Number | 2608640447 |
|---|---|
| Brand | Bosch |
The main advantage is versatility. It allows you to cut through various materials like metals, plastics, and wood with a single blade, saving time and the hassle of frequently switching blades.
It can be used on any circular saw with a 30 mm arbor. If your saw has a different bore size, you can use reduction rings to adapt it, provided the saw's maximum RPM does not exceed 7000.
The lifespan of the blade depends heavily on the materials cut, the frequency of use, and proper care. High-quality carbide teeth and heat expansion slots contribute to longevity, but regular inspection for wear is recommended.
This blade is designed for non-ferrous metals like aluminium. While it might handle some softer steels, it is not optimized for hardened steel or ferrous metals, which require specialized blades.
HLTCG stands for High-Low Triple Chip Grind. This specific tooth geometry provides a robust cutting edge that alternates between a high tooth and a low tooth with a chamfered edge, offering excellent performance and durability across different materials.
Yes, with 80 teeth, this blade is designed to provide a fine and clean finish on most wood types, including particle board and MDF. For extremely fine finish work on softwoods, a blade with a similar tooth count but optimized for wood might offer a slight edge.
Check that the blade is securely tightened to the arbor. Ensure the blade is not warped or damaged. Verify that the saw's arbor is clean and free of debris. Confirm the saw's RPM rating is appropriate for the blade.
Ensure the blade is installed in the correct direction. Check for worn or damaged teeth. Make sure the material being cut is properly supported and clamped. Reduce the feed rate of the saw.
Ensure the expansion slots are clear of debris. Avoid forcing the blade through the material; maintain a steady feed rate. For very demanding cuts, consider a brief pause to allow cooling, or a blade designed for that specific material.
Use a lubricant specifically designed for cutting metal to reduce friction and heat. Ensure a slower, more consistent feed rate and allow the blade to do the work. A blade with fewer teeth might be more effective for extremely thick or hard metals.
Setup:
Compatibility:
Care:
