Geberit Kappa50 Dual Flush Plate - Gloss Chrome
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Geberit Kappa50 Dual Flush Plate in Gloss Chrome is ideal for homeowners looking to update their bathroom's functionality and aesthetics with a modern, hygienic solution. Its key benefit lies in its dual-flush system for water conservation and the integrated in-cistern block holder for enhanced freshness. A potential caveat is its specific compatibility requirements with certain Geberit UP200 cisterns and frames. This flush plate offers a sleek, push-button operation and is constructed from durable die-cast zinc.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 115260211 |
| Brand | Geberit |
Extended Product Information
FAQs
What cisterns is the Geberit Kappa50 compatible with?
The Geberit Kappa50 Dual Flush Plate is compatible with Geberit Kappa concealed cisterns, specifically the UP200 model, and Geberit frames 111.292.00.1 and 111.242.00.1.
Can I use any brand of cleaning block with this flush plate?
While the holder is designed for Geberit's in-cistern blocks, other compatible types may fit. However, for optimal performance and to avoid potential issues, using genuine Geberit blocks is recommended.
How do I install the Geberit Kappa50 flush plate?
Installation involves turning off the water, removing the old plate, inserting the cleaning block (if used), aligning the new plate, securing it to the frame, and then restoring the water supply. Detailed steps are provided in the setup section.
How often should I replace the in-cistern cleaning block?
The frequency of replacement depends on the type of block used and the flush frequency. Typically, blocks last several weeks to a few months. Refer to the packaging of the cleaning block for specific guidance.
What are the dimensions of the flush plate?
The flush plate has a height of 142 mm, a width of 211 mm, and a depth of 15 mm.
Is the gloss chrome finish difficult to maintain?
The gloss chrome finish is easy to clean with a damp cloth and mild soap. However, like all shiny surfaces, it can show fingerprints and water spots more readily than matte finishes, requiring regular wiping to maintain its shine.
Troubleshooting
Flush plate buttons are stiff or difficult to press.
Check for any obstructions behind the flush plate. Ensure the mechanism is correctly aligned and that no debris has entered the linkage. If the issue persists, re-check compatibility with the cistern and frame.
Reduced flush not working or full flush is weak.
Verify that the correct flush actuator rods are attached to the buttons and that they are properly engaged with the cistern mechanism. Check for any blockages within the cistern outlet.
In-cistern block holder is difficult to access or use.
Refer to the detailed installation manual for the Kappa50 plate and your specific cistern model. Ensure the plate is correctly seated and the holder mechanism is functioning as intended.
Gloss chrome finish appears dull or scratched.
Avoid using harsh cleaning chemicals or abrasive cloths. Stick to a soft, damp cloth with mild soap for cleaning. If scratches are present, they are likely permanent and may require replacement of the flush plate.
Pros and Cons
Pros
- Enhances bathroom aesthetics with a modern gloss chrome finish.
- Promotes water conservation through its dual-flush mechanism.
- Improves bathroom hygiene and freshness with the integrated block holder.
- Constructed from robust die-cast zinc for lasting durability.
- Simple and intuitive push-button operation.
Cons
- Requires specific Geberit UP200 cisterns and compatible frames for installation.
- The gloss finish may show water spots or fingerprints more readily than matte finishes.
- In-cistern block replacement is an ongoing requirement for maintaining freshness.
Setup, Compatibility & Care Instructions
Compatibility:
This flush plate is specifically designed for use with:
- Geberit Kappa concealed cisterns (UP200)
- Geberit frames 111.292.00.1 and 111.242.00.1
Ensure your existing cistern and frame model match these specifications before installation.
Setup:
- Ensure the water supply to the cistern is turned off.
- Remove the old flush plate following the manufacturer's instructions for your specific cistern model.
- Open the cover of the flush plate mechanism.
- Insert the Geberit toilet block into the designated holder if desired.
- Align the new Geberit Kappa50 Dual Flush Plate with the cistern opening and secure it according to the frame's specific instructions.
- Turn the water supply back on and test both flush functions.
Care:
- Clean the flush plate surface with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, which can scratch the gloss finish.
- For stubborn marks, use a mild soap solution and rinse thoroughly.
- Periodically check and replace the in-cistern cleaning block as per its own instructions.
- Ensure the area around the flush plate is kept clean to prevent debris buildup.