Best current price£99.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£99.99Visit shop In Phase Gold Src6 6-Channel Active Hi To Low Frequency Converter
Visit shop4 offers from £99.99 - £229.99
View price history by clicking the chart icon.
The In Phase SRC6 is designed for car audio enthusiasts seeking to enhance their sound systems with ease. This 6-channel active hi-to-low frequency converter allows you to fine-tune your audio without the complexity of other processors. While it offers a powerful performance, keep in mind its small footprint might require careful placement in your vehicle.
| Model Part Number | SRC6 |
|---|---|
| Brand | In Phase |
The SRC6 converts high-level speaker inputs to low-level RCA outputs, allowing you to connect aftermarket amplifiers to factory head units or other audio sources.
Mount the SRC6 in a secure location, preferably in an area with good air circulation and easy access to make adjustments.
Use high-quality RCA cables and speaker wire for the best audio performance and signal transfer.
The SRC6 can handle a maximum speaker input of 60 watts @ 4 Ohm.
The SRC6 is compatible with most amplifiers that accept RCA inputs. Ensure the amplifier's input sensitivity is compatible with the SRC6's output level.
The ground loop jumper selector helps to eliminate ground loop noise, which can cause humming or buzzing sounds in the audio system. Experiment with the jumper setting to find the quietest configuration.
The frequency response is 10Hz - 22kHz.
Check all wiring connections, including power, ground, and RCA cables. Ensure the head unit is providing a signal and that the amplifier is powered on. Verify that the SRC6 is correctly connected and configured.
Check the gain settings on the SRC6. Reduce the input gain if the distortion occurs at higher volumes. Verify the speaker impedance and amplifier compatibility. Inspect for loose connections.
Check the ground connections for proper grounding. Make sure all ground wires are connected to a clean metal chassis point. Ensure RCA cables are routed away from power wires.
