Best current price£238.79from B&Q
Shopping.co.uk recommended and popular offers
B&Q£238.79Visit shop B&Q - 350Kg Galvanised Trailer Suspension Units & 10" Wheels & Tyres Kit 4" Pcd Hubs
Visit shop
eBay£238.79Visit shop 350kg Galvanised Trailer Suspension Units & 10"" Wheels & Tyres Kit 4"" PCD Hubs
Visit shop2 offers from £238.79
View price history by clicking the chart icon.
This AB Tools Trailer Suspension Units & Wheels Kit is designed for individuals and businesses needing to replace or upgrade the running gear on trailers with a maximum weight capacity of 350kg. It offers a robust and durable solution with key benefits including enhanced load distribution and longevity thanks to its galvanized construction and adjustable taper roller bearings. A potential consideration is ensuring the stub axle size and mounting hole dimensions are compatible with your existing trailer frame.
| Model Part Number | KT020_TRSP10_34 |
|---|---|
| Brand | AB Tools |
The maximum weight capacity for this kit is 350kg per pair of suspension units.
The kit includes 145R10 radial tires fitted on 10" steel wheels.
The stub axle has a 1" diameter and a 2" long bearing surface.
Adjustable taper roller bearings typically require tightening until slight drag is felt, then backing off slightly until free movement with minimal play is achieved. Consult the specific bearing documentation for precise instructions.
No, this kit is rated for a maximum of 350kg. Using it on a trailer exceeding this weight limit can lead to failure and is unsafe.
The hubs have a 4-inch PCD (Pitch Circle Diameter).
The kit includes 1 pair of 350kg Suspension Units, 2 x 10" Steel Wheels with 145R10 Radial Tires, 2 x 4" PCD Trailer Hubs, 2 x Bearing Sets (with seals), 2 x Hub Caps, and 8 x Wheel Nuts.
Check wheel nut tightness. Ensure bearings are correctly adjusted and not too loose or too tight. Verify tire pressures are correct. Inspect suspension arms for any signs of damage or excessive flex.
The taper roller bearings may need adjustment or replacement. Refer to the bearing manufacturer's guidelines for proper adjustment procedures. If noise persists, the bearings may be worn and require replacement.
Check wheel alignment if applicable. Ensure tires are properly inflated. Verify that the suspension units are not damaged and are allowing for correct wheel movement. Uneven wear can also be caused by overloading the trailer.
Inspect the suspension arms and mounting points for cracks or deformation. If damage is found, the suspension unit may need to be replaced. Ensure the trailer's load does not exceed the 350kg capacity.
Setup: Installation involves mounting the suspension units to the trailer chassis, typically requiring drilling and bolting through the chassis frame. Ensure the suspension unit mounting holes (76mm along length, 78mm across width) align correctly with your trailer frame. Attach the hubs to the stub axles of the suspension units, install the bearings (including seals) into the hubs, and then fit the wheel assemblies (wheels with tires and nuts) onto the hubs. Ensure wheel nuts are tightened to the manufacturer's recommended torque.
Compatibility: This kit is designed for trailers with a maximum gross weight of 350kg. Key dimensions to verify for compatibility are:
Care: To ensure longevity, regularly inspect the wheels, tires, and suspension units for any signs of wear or damage. Keep the hubs clean and lubricate the bearings as per the bearing manufacturer's recommendations, or at least annually. Check tire pressures regularly. After washing the trailer, ensure no water is trapped within the hub assemblies. The galvanized finish should be maintained by avoiding abrasive cleaners that could scratch the protective layer.
