Philips Hue Lightstrips Accessories - White

No, these connectors are specifically designed for Philips Hue Flux and Flux ultra-bright strip lights only. They will not be compatible with other brands.

Each connector allows you to join two pieces of strip light at a 90-degree angle. You can extend your total strip light length up to a maximum of 20 meters using multiple cut sections and connectors.

The connectors themselves do not require a Hue Bridge. However, to control your Hue strip lights wirelessly, connect them to your smart home system or use the Hue app, a Hue Bridge is recommended.

You can extend your Philips Hue strip lights to a maximum total length of 20 meters. This pack includes four connectors, allowing for multiple connection points within that total length.

Yes, as long as both pieces are from a compatible Philips Hue Flux or Flux ultra-bright strip light, they can be connected using these corner connectors.

You must cut the strip light precisely at the indicated cut marks (16.7cm intervals). Cutting elsewhere may damage the internal wiring and prevent a proper connection or function.

Verify that the strip light was cut precisely at the marked interval. Ensure the electrical contacts on both the strip light and the connector are clean and properly aligned. Check that the strip light is correctly seated within the connector. Test the strip light without the connector to rule out issues with the strip itself.

Re-seat the strip light into the connector, ensuring a firm and even connection. Check for any debris or damage on the electrical contacts. If the issue persists, try using a different connector from the pack, as the current one may be faulty.

Ensure you are using the correct Philips Hue strip light model compatible with these connectors. Gently press the strip into the connector's housing until it clicks or feels secure. Avoid forcing the connection, which could damage the strip or connector.