Air Compressor Pressure Control Switch - 1/4" BSP - Single Phase - KATSU
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for users of the KATSU Air Compressor Pressure Control Switch, designed to help you understand and effectively utilize its features. This switch is ideal for anyone looking to regulate the pressure of their air compressor, offering adjustable settings and reliable performance. Please note that this switch operates at 220V and requires a 20A power supply.
All features
| Model Part Number | 214121 |
|---|---|
| Brand | KATSU |
Extended Product Information
FAQs
What voltage does this switch operate on?
The switch operates on a 220V power supply.
What is the maximum pressure this switch can handle?
The switch can handle a maximum pressure of 10 Bar.
What type of connection does this switch use?
The switch uses a 1/4" BSP threaded port for connection to the air compressor.
Can I use this switch with any air compressor?
The switch is compatible with most air compressors that use a 1/4" BSP connection and operate within the 20A and 220V specifications.
How do I adjust the pressure?
Use the adjustment knob on the switch to set the desired pressure level.
What should I do if the compressor runs continuously?
Check for leaks in the air lines and adjust the pressure setting.
Is this switch suitable for industrial use?
Yes, it can be used in small industrial settings, provided the operating parameters are within the switch's specifications.
Troubleshooting
Air compressor does not turn on.
Check the power supply to the switch and ensure it is properly connected and receiving 220V power. Also, check the circuit breaker.
Air compressor runs continuously.
Check the pressure setting on the switch and adjust it as needed. Ensure there are no leaks in the air lines or connections.
Air pressure is too low.
Increase the pressure setting on the switch gradually until the desired pressure is achieved.
Air leaks from the switch.
Check all threaded connections for tightness and ensure the fittings are properly sealed. Replace the switch if necessary.
Pros and Cons
Pros
- Easy to adjust and set pressure levels.
- Compatible with a wide range of air compressor setups due to its 1/4" BSP port.
- Durable design for reliable and long-lasting performance.
- Provides essential safety and control for air compressor operation.
Cons
- Requires a 220V power supply, which may not be compatible with all electrical systems.
- Maximum pressure setting is limited to 10 Bar.
- Requires some technical knowledge for installation and setup.
Setup, Compatibility & Care
Setup
- Safety First: Always disconnect the air compressor from the power supply before installation.
- Thread Connection: Connect the switch to the air compressor tank using the 1/4" BSP threaded port.
- Electrical Connection: Ensure the switch is wired correctly to a 220V power source, following local electrical codes.
- Pressure Adjustment: Adjust the pressure setting on the switch to the desired level.
Compatibility
- The switch is compatible with most air compressors that use a 1/4" BSP connection.
- Ensure your air compressor's specifications are within the switch's operating parameters (220V, 20A, 10 Bar).
Care
- Regularly inspect the switch for any signs of damage or leaks.
- Keep the switch clean and free of debris.
- Do not exceed the maximum pressure rating of 10 Bar.