Best current price£232.47from B&Q
Shopping.co.uk recommended and popular offers
B&Q£232.47Visit shop B&Q - Protex Heavy Duty Floor Paint Garage Workshop Shed 5 Litres Grey 5L X3
Visit shop2 offers from £232.47 - £243.99
View price history by clicking the chart icon.
The Tetrosys Protex Heavy Duty Floor Paint is designed for DIY and professional use, offering a durable, decorative gloss finish for various interior surfaces like concrete, brick, stone, wood, lino, and floor tiles. Its primary benefit is providing a tough coating resistant to foot and vehicle traffic, oil, grease, and detergents, while being quick-drying and easy to maintain. A key consideration is the need for proper surface preparation and potential use of a slip-resistant additive for specific applications.
| Model Part Number | TPFG5L |
|---|---|
| Brand | Tetrosyl |
Tetrosyl Protex Heavy Duty Floor Paint is designed for interior use only. Exterior surfaces may require different types of coatings that can withstand weather elements.
The paint should be completely dry before putting the area to use. While recoating is possible after 12 hours, allow at least 24-48 hours for full curing before exposing to heavy foot traffic or vehicle loads, depending on environmental conditions.
Clean spills immediately with a damp cloth. For general cleaning, use a soft brush or mop with mild detergent and water. Avoid using harsh chemicals or abrasive scrubbers.
Mixing colors is generally not recommended unless specifically stated as possible by the manufacturer. Doing so could affect the paint's performance and finish. Always test if attempting to mix.
For very porous surfaces, a Tetrosyl Floor Sealer or a mixture of four parts Protex paint to one part White Spirit can be used as a primer. Always test adhesion on a small area first.
Add approximately 10% (around 500g per 5L tin) of Safe Grip Additive. This can be adjusted to meet individual requirements for slip resistance.
Ensure the surface was properly cleaned, degreased, and dry before application. Porous surfaces may require sealing. Check for compatibility with previous coatings by testing a small area.
Stir the paint thoroughly before and during application. Use a quality brush or roller suitable for floor paints. Apply thin, even coats rather than one thick coat.
Stir the paint mixture very frequently during application. Ensure the additive is mixed thoroughly into the paint before starting. Consider using less additive if it causes excessive settling.
Ensure application conditions are within the recommended temperature range (around 20°C/68°F) and humidity is not excessively high. Avoid applying excessively thick coats.
Preparation is crucial for optimal performance. Ensure all surfaces are dry, clean, and free from dust, wax, and loose materials. For concrete and stone, remove oil and grease using appropriate cleaners and wash thoroughly, allowing ample drying time. Concrete must be at least four weeks old before painting. If applying over existing coatings, conduct a test patch to confirm adhesion and compatibility. Very porous surfaces should be sealed first with a Floor Sealer or a diluted mixture of the Protex paint (4 parts paint to 1 part White Spirit).
Application: Stir the paint thoroughly before use. If adding Safe Grip Additive, stir it in and continue to stir frequently during application to prevent settling. Apply using a brush or a suitable roller. The first coat typically dries in 3-4 hours at 20°C (68°F).
Drying & Recoating: A second coat can be applied after approximately 12 hours under normal conditions. Ensure recoating occurs within 48 hours. The painted area should be completely dry before resuming use.
Care: Clean spills promptly. The surface is easy to maintain with regular sweeping and occasional washing with mild detergents. Avoid abrasive cleaners that could damage the finish.
