Bosch Pilot Drill for EXPERT Power Change Plus - HSS-G 7.15 x 105 mm

Its primary function is to accurately center the hole saw on the material, preventing it from skidding and ensuring a clean, precise start to the cut.

No, this pilot drill is specifically designed for use with Bosch EXPERT PC Plus Hole Saws that have a 60-mm cutting depth and require the Bosch Power Change Plus arbor system.

You do not need a special drill; however, you must use it with the Bosch Power Change Plus keyless arbor, which then attaches to your standard drill or impact driver.

HSS-G stands for High-Speed Steel Ground. This indicates the material and manufacturing process, signifying a durable and precise cutting tool.

The Quick Change system, integrated with the Power Change Plus arbor, allows you to switch between accessories like the pilot drill and the hole saw quickly and without tools, saving time on the job.

This pilot drill is designed for use with hole saws that have a 60-mm cutting depth.

Ensure the arbor is clean and free of debris. Verify that you are using the correct Bosch Power Change Plus arbor and that the pilot drill is fully seated in its designated slot.

Confirm the pilot drill is securely locked in the arbor and correctly centered. Ensure the hole saw is also properly attached to the arbor. Check if the material surface is flat and stable.

This can occur if excessive force is applied or if the drill is used at too high a speed. Ensure the pilot drill is accurately starting the cut and that the hole saw is not binding. Use appropriate speed settings for the material being drilled.