Best current price£43.54from eBay
Shopping.co.uk recommended and popular offers
eBay£43.54Visit shop 3L Maxilight Plus Car Body Filler & Pro Range Reuseable Plastic Mixing Board
Visit shop2 offers from £43.54 - £47.70
View price history by clicking the chart icon.
The Maxilight Plus Car Body Filler and Mixing Board Kit is designed for automotive enthusiasts and professional body shop technicians who require a reliable, high-quality solution for repairing surface imperfections. Its primary benefit lies in the 3-litre lightweight polyester filler, which offers superior ease of application and professional-grade finishing capabilities, though users should be prepared to supply their own hardener as it is not explicitly detailed in the kit contents.
| Model Part Number | 62044/MB |
|---|---|
| Brand | Maxilight |
This is primarily formulated for metal automotive panels; check the manufacturer's data sheet for specific compatibility with non-metal surfaces.
While the filler is soft, scrape off excess material. Once hardened, the material should pop off the flexible surface easily, or you can use a suitable solvent cleaner.
Polyester filler is moisture-resistant once cured, but it should always be sealed with primer and topcoat to prevent rust from forming underneath.
Start with a coarse grit (80-120) to shape the filler and finish with a fine grit (240-400) to prepare the surface for primer.
Cure time depends on ambient temperature and the amount of hardener used, but typically it is ready for sanding within 20 to 30 minutes.
Reduce the amount of hardener added to the filler mixture or work in smaller batches to accommodate shorter working times.
Ensure the surface is properly prepped and warm; if the room is too cold, the filler viscosity may increase, making it harder to spread.
Before starting, ensure the metal surface is sanded and free of rust, dust, or grease to ensure maximum adhesion. Always wear appropriate personal protective equipment, including gloves and a mask, as polyester filler dust can be irritating. After using the mixing board, clean any remaining filler residue immediately before it hardens to maintain the board's surface for future use. Store the filler in a cool, dry place and ensure the lid is sealed tightly after each use to prevent atmospheric moisture from degrading the product.
