Ferodo Racing Super Formula DOT 4 Performance Brake Fluid - 500ml

The Ferodo Racing Super Formula DOT 4 brake fluid has a typical dry boiling point of 330°C.

While it meets DOT 4 specifications, its extreme high-performance nature and high boiling point might mean it absorbs moisture faster than standard DOT 4 fluids. For optimal longevity and performance, it's best suited for performance driving and racing applications. Always check your vehicle's manual.

For racing or track use, it is recommended to change the fluid before each event or at least annually. For performance road use, consult your vehicle manufacturer's recommendations, but consider changing it more frequently than a standard DOT 4 fluid if you engage in spirited driving.

It is not recommended to mix this racing fluid with standard DOT 4 fluids, as it can compromise its high-performance characteristics. For best results, use it as a complete system fill. If mixing is unavoidable, ensure it is with another DOT 4 fluid and consult a professional.

Hygroscopic means the fluid readily absorbs moisture from the surrounding atmosphere. This absorbed water lowers the boiling point of the fluid, potentially leading to brake fade. It also increases the risk of corrosion within the brake system.

Used brake fluid should be disposed of responsibly. Check with your local waste management or auto parts store for proper hazardous waste disposal guidelines in your area.

This can indicate air in the system or that the fluid has absorbed too much moisture and is boiling. Bleed the brake system to remove air and consider replacing the fluid if it's old or has been exposed to the atmosphere.

Cloudiness can be a sign of contamination or moisture absorption. Replace the brake fluid with fresh fluid.

Immediately flush the affected area with copious amounts of water to prevent paint damage. Do not wipe.