Mercury Amplified Indoor HDTV Aerial - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to improve their TV and radio reception indoors, especially in areas with weaker signals. The Mercury Amplified Indoor HDTV Aerial boosts both digital TV and FM/DAB radio signals, offering a clearer viewing and listening experience. Keep in mind that performance can vary based on your distance from broadcast towers and local interference.
All features
| Colour | Black |
|---|---|
| Model Part Number | ST36B |
| Brand | Mercury |
Extended Product Information
FAQs
How far can this aerial receive signals?
The aerial is designed to receive signals within a 45-65 mile radius of the broadcast towers.
Does this aerial require an internet connection?
No, this aerial receives signals from over-the-air broadcasts; it does not require an internet connection.
Can I use this aerial with multiple TVs?
Yes, you can use a splitter (not included) to connect the aerial to multiple TVs. However, this may slightly reduce the signal strength to each TV.
What is the purpose of the gain control?
The gain control allows you to adjust the amplification of the signal. In areas with weak signals, increasing the gain can improve reception. In areas with strong signals, reducing the gain can prevent overloading the receiver.
How do I adjust the antenna?
Adjust the loop antenna by tilting and panning it for the best UHF TV signal. Extend and adjust the telescopic antennas for optimal VHF and FM radio reception.
What does the LTE filter do?
The LTE filter is designed to reduce interference from 4G/5G mobile signals, which can sometimes interfere with TV reception.
Is this aerial suitable for both TV and radio?
Yes, it is compatible with both Digital Terrestrial TV and DAB/FM radio signals.
Troubleshooting
No signal or poor picture quality
Reposition the aerial, adjust the antennas, and increase the gain. Rescan for channels. Ensure there are no obstructions between the aerial and the broadcast towers.
Missing channels
Rescan for channels on your TV or radio. Check the antenna connections.
Interference or noise
Adjust the antenna position to reduce interference. Ensure the aerial is not near other electronic devices that could cause interference.
Aerial not powering on
Check the power connection and the power outlet. Ensure the LED indicator on the aerial is lit.
Pros and Cons
Pros
- Improved signal strength for better TV and radio reception.
- Compatibility with a wide range of signals (Digital TV, DAB/FM).
- Adjustable features to optimize signal capture in different environments.
- Built-in filter to minimize interference.
- Easy to set up and use.
Cons
- Performance can be affected by the user's distance from broadcast towers.
- Indoor aerials may not perform as well as outdoor aerials in areas with very weak signals.
- Requires a power connection.
- May require some experimentation with antenna positioning.
- Signal quality is affected by nearby interference sources.
Setup, Compatibility & Care
- Placement: Position the aerial near a window or in a location with a clear line of sight to the broadcast towers.
- Connection: Connect the aerial's coaxial cable to your TV or radio's antenna input.
- Power: Plug the aerial into a power outlet. The LED indicator should light up.
- Scanning: Use your TV or radio's menu to scan for available channels.
- Adjustment: Adjust the loop and telescopic antennas for the best signal reception. Use the gain control knob to fine-tune the signal strength.
Compatibility
The aerial is compatible with Digital Terrestrial TV, DAB, and FM radio signals. Ensure your TV or radio supports these formats.
Care
- Wipe the aerial with a dry cloth to clean. Do not use water or harsh chemicals.
- Avoid placing the aerial near heat sources or in direct sunlight.