Best current price£21.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£21.95Visit shop B&Q - Sediment Water Filter Cartridge10" X 2.5"5 MicronSpun Polypropylene (10 Pack)
Visit shop3 offers from £21.95 - £24.95
View price history by clicking the chart icon.
This 10-pack of Finerfilters Sediment Water Filter Cartridges is designed for homeowners and businesses seeking to remove common particulate contaminants from their water supply. With a 5-micron rating, these filters effectively capture sand, dirt, and rust, ensuring cleaner water and protecting downstream appliances. A key benefit is their versatility, serving as a standalone pre-filter or as the first stage in a Reverse Osmosis system. The primary caveat is their specific micron rating, meaning they are not designed for chemical or dissolved contaminant removal.
| Brand | Finerfilters |
|---|
This filter is specifically designed to remove sediment, such as sand, silt, dirt, and rust particles. It does not remove dissolved solids, chemicals, bacteria, or viruses.
Replacement frequency varies based on water quality and usage. A general recommendation is every 3 to 6 months. If you notice reduced water flow or visible sediment in your water, replace it sooner.
A micron is a unit of measurement. A 5-micron rating means the filter can capture particles down to 5 microns in size. Smaller micron ratings capture smaller particles.
This cartridge can be used as part of a whole-house filtration system. For high flow rate applications, ensure it is installed in an appropriately sized filter housing and consider its lifespan in relation to your household's water consumption.
Yes, this filter is commonly used as the first stage (Stage 1) in a Reverse Osmosis system to remove sediment before water reaches the more sensitive RO membrane.
Spun filters, like this one, are made from fibers that are thermally bonded together, creating a dense structure. Pleated filters have a larger surface area due to their folded design, often allowing for higher flow rates and sediment capacity, but may be less dense.
The filter cartridge measures 10 inches in length and 2.5 inches in diameter (10" x 2.5").
The filter cartridge may be clogged. Replace with a new cartridge. If the issue persists, check the filter housing for blockages or consider if a finer micron rating is needed.
The filter may have been bypassed, installed incorrectly, or the sediment load is higher than the 5-micron rating can handle effectively. Ensure the cartridge is seated properly in the housing and check for leaks. If heavy sediment is present, consider a pre-filter with a coarser rating or multiple stages.
Ensure the O-ring is clean, properly seated, and lubricated (if necessary). Tighten the housing securely but do not overtighten, which can damage the O-ring or housing.
Setup: To install, turn off the water supply to the filter housing. Unscrew the housing, remove the old cartridge, and insert the new Finerfilters Sediment Water Filter Cartridge. Ensure it is seated correctly. Tighten the housing securely and slowly turn the water supply back on, allowing the system to fill and flush for a few minutes before use.
Compatibility: This cartridge is designed for standard 10" x 2.5" filter housings. It is compatible with most single-stage filter systems and serves as an effective Stage 1 pre-filter for Reverse Osmosis (RO) systems.
Care: Sediment filters are designed for single use and should be replaced regularly. The replacement frequency depends on water quality and usage, but a general guideline is every 3-6 months. Visually inspect the cartridge during routine checks; if it appears heavily clogged or discolored, replace it sooner.
