d-c-fix Wall Tile - Metal and Stone

Adhesion may be reduced on wallpaper, especially if it is textured or vinyl. For best results, apply to smooth, clean surfaces. If you choose to apply over wallpaper, ensure it is firmly adhered and in good condition.

These tiles are water-resistant and suitable for wet areas like splashbacks. However, they are not designed for constant immersion in water or direct high-pressure shower spray. For areas with heavy direct water exposure, consider additional sealing.

To remove, gently heat the tiles with a hairdryer on a low setting to soften the adhesive. Then, carefully peel them away from the surface at a low angle. If any residue remains, it can typically be cleaned with a mild adhesive remover.

Yes, the product description suggests combining them with other d-c-fix mosaic or oriental style tiles for a unique result, indicating design flexibility.

The tiles are designed to last and are scratch-resistant, maintaining their appearance over time. The exact lifespan can vary depending on the environment and maintenance.

You will need a sharp utility blade for cutting, a measuring tape, and a soft cloth or squeegee for smoothing. A hairdryer can be helpful for removal.

Ensure the surface is clean, dry, and smooth before application. For textured surfaces, consider smoothing them first or using a primer designed for tile adhesion. Ensure the protective backing film is fully removed.

Gently lift the affected tile corner and reapply, smoothing out the bubble with a soft cloth or squeegee. For stubborn bubbles, a small pinprick can release the air, then smooth flat.

Use a sharp, fresh utility blade. Score the tile firmly along your cut line multiple times rather than trying to cut through in one pass. Use a ruler or straight edge for guidance.

Ensure the edges of the surface are clean and dry. Press down firmly on the edges. If the adhesion is still weak, a small amount of appropriate tile adhesive or sealant can be used on the edges for extra security.