Best current price£13.91from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£13.91Visit shop Rustins Grain Quick Dry Exterior Wood Oil 500Ml Ewdoil500
Visit shop
eBay£19.49Visit shop Natural Finish Wood Oil for Exterior Wood Rustins Quick Dry Easy Wipe-on 500ml
Visit shop
The Range£19.96Visit shop Rustins Exterior Wood Oil 500Ml - Quick Dry, Water-Based - Ewdoil500 - Matt Dark Oak
Visit shop27 offers from £13.91 - £107.99
View price history by clicking the chart icon.
This Rustins Exterior Wood Oil in a 1L case is designed for homeowners and DIY enthusiasts looking to protect and enhance all types of exterior timber. Its key benefit is providing a durable, water-resistant finish that highlights the natural beauty of wood grain. A minor caveat is its drying time, which requires proper ventilation and curing conditions. This penetrating oil dries to a hard, protective seal, ideal for doors, joinery, and garden furniture, offering both protection and aesthetic appeal.
| Model Part Number | EWDOIL1000 |
|---|---|
| Brand | Rustins |
For optimal protection and appearance, it is recommended to reapply a maintenance coat annually, or more frequently if the wood is heavily exposed to harsh weather conditions.
Yes, while designed for exterior use, this oil can also be used on interior timber and veneered surfaces to enhance their natural beauty and provide a durable finish.
The approximate coverage is 13m² per litre for one coat. Actual coverage may vary depending on the porosity and condition of the timber.
Clean the treated wood surface with mild soap and water. Avoid abrasive cleaners that could damage the finish.
Apply liberally with a brush or cloth, working the oil into the grain. Allow it to penetrate for 15-30 minutes, then wipe off any excess that hasn't been absorbed. Ensure even application and thorough removal of excess for best results.
The oil nourishes and protects wood from moisture and environmental damage, enhancing its durability. While it brings out the natural beauty, specific UV-blocking properties are not the primary feature; regular maintenance is key for long-term protection.
Ensure the wood was properly prepared and free of dust. Apply oil evenly and wipe off excess thoroughly after allowing penetration time. Consider a second coat if the wood is very dry.
Check that all excess oil has been wiped off. Ensure adequate ventilation and a suitable ambient temperature (generally above 10°C). Avoid applying in damp conditions.
This indicates excess oil was not removed. Gently rub the affected area with a cloth dampened with the oil to smooth it out, then wipe off all excess immediately. If the problem persists, lightly sand and reapply a thin coat, ensuring all excess is removed.
Preparation: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand the surface if necessary and remove all dust.
Application: Apply liberally with a brush, cloth, or roller. Work the oil into the grain, ensuring even coverage. For the best results, apply one coat and allow it to penetrate for approximately 15-30 minutes, then wipe off any excess oil that has not been absorbed. Allow to dry completely before applying a second coat. Apply subsequent coats as needed, following the same procedure, until the timber is saturated and a uniform finish is achieved.
Compatibility: Suitable for all types of exterior timber, including hardwoods and softwoods. It can be used on doors, joinery, decking, fences, and garden furniture. Always test on an inconspicuous area first.
Care: To maintain the finish, clean the surface with mild soap and water. Reapply a maintenance coat annually or as needed, depending on exposure to weather conditions. Ensure good ventilation during application and drying. Store the product in a cool, dry place away from direct sunlight.
