Best current price£12.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.99Visit shop B&Q - 400 Ml White Peelable Film Semi-MattFlexible Protective Coating For Alloy Wheels & Tuning Parts
Visit shop1 offer from £12.99
View price history by clicking the chart icon.
The SolaDirect Peelable Spray Film is an ideal solution for automotive enthusiasts, DIY hobbyists, and homeowners looking for a reversible way to refresh the appearance of their gear. By providing a semi-matt, protective coating that guards against UV rays, moisture, dirt, and dust, it serves as both a cosmetic upgrade and a shield for surfaces like aluminum alloy wheels or workshop components; however, users must ensure the underlying surface is meticulously cleaned and degreased, as the film's longevity and ease of removal depend entirely on proper preparation.
| Colour | White |
|---|---|
| Model Part Number | 1415546 |
| Brand | SolaDirect |
Yes, it is generally suitable for many rigid plastics, but you should always perform a patch test on an inconspicuous area first.
For optimal protection and ease of removal, 3 to 4 thin, even coats are recommended.
When applied to a clean, factory-finish paint job, the film is designed to be safe and removable without leaving residue.
While it can handle standard outdoor temperatures, it is not intended for use on high-heat engine components or brake calipers.
It is not recommended. High-pressure water can force its way under the edges and cause the film to lift prematurely.
This usually occurs if the film was applied too thinly; applying a thicker, more uniform coat initially makes the removal process much easier.
The surface was likely not fully degreased or dried before application. Clean the surface thoroughly with a solvent and re-apply.
After every use, turn the can upside down and spray for 2-3 seconds to clear the valve and nozzle path.
Before starting, ensure the target surface is completely clean, dry, and free of grease or wax. Any residual oils will prevent the film from bonding correctly, leading to premature peeling.
To maintain the film, clean with mild soapy water and a soft cloth; avoid using harsh solvents or high-pressure power washers, which may lift the edges of the coating.
