APC Smart-UPS SRT 2200VA - SRT2200RMXLI-NC




Best current price£2,089.43from PCHUB.UK
Best offers
Shopping.co.uk recommended and popular offers
Apc Smart-Ups On-Line Srt2200rmxli-Nc - 2200Va. 8X C13 & 2X C19. R
Visit shop



Best current price£2,089.43from PCHUB.UK
Shopping.co.uk recommended and popular offers
Apc Smart-Ups On-Line Srt2200rmxli-Nc - 2200Va. 8X C13 & 2X C19. R
Visit shop10 offers from £2,089.43 - £2,870.11
View price history by clicking the chart icon.
This guide provides comprehensive information for IT professionals and network administrators using the APC Smart-UPS SRT 2200VA (SRT2200RMXLI-NC). It ensures business uptime and data protection by providing clean, reliable power. This rackmount UPS is ideal for protecting servers, network devices, and critical equipment. Note that while it offers robust protection, external battery packs may be needed for extended runtime requirements.
| Model Part Number | SRT2200RMXLI-NC |
|---|---|
| Brand | A.P.C. |
The battery cartridge (APCRBC141) is user-replaceable. Refer to the user manual for detailed instructions. Ensure the UPS is on battery power during replacement.
The SRT2200RMXLI-NC has a 3-year warranty, excluding the battery cartridge, which has a 2-year warranty. You can extend both warranties with the APC service pack (WBEXTWAR3YR-SP-04).
Use the built-in Network Management Card (NMC). Configure the network settings in the NMC interface and use the SNMP protocol to monitor the UPS remotely.
Yes, you can connect external battery packs (SRT72RMBP) to extend the runtime.
It has 8x IEC 320 C13 and 2x IEC 320 C19 outlets.
ECO mode is an operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
The UPS comes with PowerChute Network Shutdown software for graceful shutdowns.
It conforms to CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, and VDE.
Check the power connection and ensure the UPS is connected to a live power outlet. Verify the internal circuit breaker hasn't tripped.
The UPS is likely in battery mode. Check the power input and investigate the cause of the power disruption. If the battery is low, recharge the battery.
Ensure the UPS is powered on. Check the display settings. If the display is still blank, there may be a hardware issue; contact support.
Verify the network connection and check the IP address settings. Ensure the NMC is properly configured on your network.
The battery may need to be replaced. Check the battery status in the LCD display and consider replacing the battery cartridge.