Wooden Slats Wallpaper - Grey - Striped

This wallpaper is best suited for smooth, clean, and dry interior walls. It is ideal for areas like living rooms, bedrooms, and hallways where a sophisticated, architectural look is desired.

The surface is washable. You can gently wipe it clean with a damp cloth or sponge. Avoid using harsh chemicals or abrasive cleaners, and do not saturate the paper with water.

An offset pattern match means that the pattern on one strip of wallpaper will align with the pattern on the next strip, but not necessarily at the same height. For this wallpaper, the pattern repeats every 53cm, with an offset of 26.5cm, requiring careful alignment between adjacent strips.

While the surface is washable, it is generally recommended to avoid areas with high humidity or direct water exposure, such as bathrooms and kitchens, unless adequate ventilation is present and proper sealing techniques are employed.

Each roll measures approximately 10.05 meters in length and 53 centimeters in width.

This wallpaper features good lightfastness, which means it is designed to resist fading from exposure to sunlight.

The wallpaper has a smooth, matte finish. This provides a sleek, non-reflective surface that enhances the natural wood aesthetic without glare.

Ensure the wall surface was clean and dry before application. Check that sufficient paste was applied evenly to the wallpaper. Gently lift the affected area and re-paste, smoothing out the air bubbles.

Verify that you are following the 26.5cm offset pattern repeat. Ensure strips are hung level. It may be necessary to trim slightly for a perfect match on edges or around fixtures.

Check that the lighting in the room is adequate and consistent. Ensure no paste residue remains on the surface after hanging. Allow the wallpaper to fully dry for accurate colour assessment.

Use a sharp utility knife or a professional wallpaper cutting tool. Cut carefully and deliberately, especially around edges and corners, to achieve clean lines.