Best current price£24.00from eBay
Shopping.co.uk recommended and popular offers
eBay£24.00Visit shop SPAX Universal Screw 4 x 45mm T-Star Plus Stainless Steel A2 100pc
Visit shop24 offers from £24.00 - £85.68
View price history by clicking the chart icon.
These SPAX T-Star Plus T30 Washer Head Construction Screws (6.0 x 100mm) are designed for professionals and DIY enthusiasts undertaking small timber construction projects. Their primary benefit is providing reliable, precise fastening with reduced risk of wood splitting and faster installation due to specialized features. A key consideration is their specific T30 bit recess, requiring the correct driver bit for optimal performance.
| Colour | Silver |
|---|---|
| Model Part Number | 0257000601005 |
| Brand | SPAX |
You need a T30 driver bit for the T-STAR Plus recess.
Generally, pre-drilling is not required thanks to the 4CUT point. However, it can be helpful in very hard woods or when fastening close to the edge of timber to prevent splitting and ensure precise alignment.
Yes, they are made from A2 Grade Stainless Steel, which offers good corrosion resistance and is suitable for many outdoor applications.
The serrated threads reduce the screwing-in torque, allowing for faster and easier installation with less effort.
These screws are ideal for small timber construction projects. For heavy-duty structural framing, you may need larger gauge screws or specialized structural fasteners depending on load requirements and building codes.
The washer head is a domed head with a built-in washer, which distributes the load over a wider area of the material being fastened, providing a more secure hold and a cleaner appearance.
These specific screws are 6.0mm in diameter and 100mm in length.
Ensure you are using a genuine T30 driver bit and that it is fully seated in the screw's T-STAR Plus recess. Apply firm, consistent pressure.
While the 4CUT point minimizes splitting, for very brittle wood or critical joints, consider a slightly smaller pilot hole. Ensure the screw is driven straight.
Confirm the power tool has sufficient torque. Check that the screw threads are not obstructed. The serrated threads should reduce driving torque, so significant resistance may indicate a harder wood than expected or a dull drill bit.
The domed washer head is designed for a flush finish. Ensure the wood surface is flat and the screw is not overdriven. If a perfectly flush finish is critical in softer woods, minimal countersinking may be considered, but is often unnecessary.
Setup: Ensure you have a T30 driver bit for your drill or impact driver. Select the appropriate screw length for the materials being joined, ensuring sufficient thread engagement in the base material. Pre-drilling is generally not required due to the 4CUT point, but pilot holes may be beneficial in very hard woods or near edges to ensure perfect alignment.
Compatibility: These screws are designed for use with standard power tools (drills, impact drivers) equipped with a T30 bit. They are suitable for use in various wood types, including softwoods and hardwoods, for small to medium construction and woodworking projects.
Care: Store screws in a dry environment to maintain their corrosion resistance. Clean any dust or debris from the screws after installation if necessary. Inspect regularly if used in exposed outdoor applications.
