Best current price£7.29from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.29Visit shop B&Q - 10 X 4 mm Simplex Rope Clip Clamp Fixing Loose Ends Of WireJute And Polypropylene Ropes
Visit shop1 offer from £7.29
View price history by clicking the chart icon.
The SolaDirect Rope Clip Clamp - 10 x 4 mm is designed for securely fastening the loose end of a loop back to the wire rope, providing a reliable connection point for integrating with other hardware. While it offers versatile compatibility with various rope types and easy integration with accessories like thimbles and turnbuckles, users should ensure the clamp's diameter precisely matches the rope size for optimal security. Key features include robust construction for secure fastening, compatibility with wire, jute, and polypropylene ropes, and a design that facilitates connections to other rigging components.
| Brand | SolaDirect |
|---|
Its primary purpose is to securely fasten the loose end of a loop back to the main wire rope, creating a strong termination point.
This clamp is designed for wire rope of 10mm diameter and is also suitable for jute and polypropylene ropes of the corresponding size.
It is generally recommended to use at least two clamps for most applications to ensure adequate security. Follow installation instructions for precise placement.
The 'dead end' is the loose end of the rope that is looped back, and the 'live end' is the standing part of the rope. The U-bolt of the clamp goes over the dead end, and the saddle goes over the live end.
Ensure the clamp size is correct for the rope, and tighten the nuts firmly and evenly. Periodically check and re-tighten nuts, especially after the rope has been under load.
While clamps can be re-tightened, repeated installation and removal can reduce their effectiveness. For critical applications, new clamps are recommended for each installation.
Ensure the clamp size precisely matches the rope diameter. Re-tighten the nuts firmly and evenly. Consider using an additional clamp for increased security.
Verify the correct clamp size and type for the rope material. Ensure nuts are fully tightened. Check if the rope is within its load capacity and not exceeding the clamp's intended use.
Clean the clamp with a dry cloth. If corrosion is significant or structural, replace the clamp immediately.
Setup: To install the clamp, pass the rope end through the clamp opening, then loop it back alongside the main rope. Position the clamp so the U-bolt is over the dead end (the loose end) of the rope and the saddle is over the live end (the standing part). Tighten the nuts evenly and securely. It is recommended to use at least two clamps for most applications, with the first clamp placed at a distance of approximately six times the rope diameter from the end, and the second clamp placed as close to the loop as possible. Ensure nuts are tightened periodically after initial use and under load.
Compatibility: This clamp is designed for 10mm wire rope and is also suitable for jute and polypropylene ropes of the corresponding diameter. Ensure the rope material and diameter are within the specified range for safe and effective use.
Care: Inspect the clamps regularly for signs of wear, corrosion, or damage. Clean with a dry cloth. Ensure nuts remain tight; re-tighten if loose. Avoid using damaged or corroded clamps.
