Best current price£12.58from Elesi.com
Shopping.co.uk recommended and popular offers
Elesi.com£12.58Visit shop Lieber White Brushed Copper 45A 1 Gang Double Pole Switch - Single Plate - Insert Screwless - Size: 86Mm X 86Mm X 3.1 Mm
Visit shop1 offer from £12.58
View price history by clicking the chart icon.
This Lieber 45A 1 Gang Double Pole Switch is designed for homeowners and electricians needing to safely isolate high-amperage domestic appliances like ovens and showers. Its key benefit is providing robust safety and control for heavy-duty circuits, finished in a stylish brushed copper that complements modern interiors. A potential caveat is that it's specifically designed for 45A loads, so it's not suitable for standard lighting or lower-power circuits.
| Colour | Copper |
|---|---|
| Model Part Number | SS-LL-40-ISO452-CBPW |
| Brand | LIEBER |
A double pole switch disconnects both the live and neutral wires of a circuit simultaneously, providing a more complete isolation than a single pole switch.
No, this switch is rated for 45 Amps and is designed for high-power appliances like ovens and showers. It is not suitable for standard lighting circuits which have much lower amperage requirements.
The switch plate dimensions are 86mm x 86mm x 3.1mm.
Use a soft, damp cloth and mild soap if necessary. Avoid abrasive cleaners or solvents which can damage the finish.
Yes, due to the high amperage and safety implications, installation by a qualified electrician is strongly recommended and often required by regulations.
It is suitable for appliances with heavy domestic amperage loads, such as electric ovens and showers.
The brushed finish is designed to reduce reflection and minimize the appearance of fingerprints compared to a gloss finish.
Verify that the main power to the circuit is on at the consumer unit. Ensure the double pole switch is correctly wired, with both live and neutral connected. Check that the appliance itself is functioning correctly.
This may indicate a fault within the appliance or a short circuit. Do not use the switch and consult a qualified electrician to diagnose the appliance and wiring.
Ensure the mounting screws securing the switch plate to the back box are tightened appropriately. If the back box itself is loose, it may require re-securing.
Wipe the plate with a soft, damp cloth. Avoid harsh cleaning chemicals. If the finish is damaged, it may require replacement of the switch plate.
Setup: This switch is designed to replace existing single-gang, double-pole switches. Installation should *only* be performed by a qualified electrician to ensure safety and compliance with electrical regulations. The switch requires appropriate wiring for a 45A circuit, connecting both the live and neutral conductors from the appliance. Ensure the power supply is completely isolated at the consumer unit before commencing any work.
Compatibility: This switch is compatible with standard UK single-gang back boxes. It is designed for 45 Amp circuits, making it suitable for dedicated circuits powering appliances such as electric ovens, showers, or other high-load domestic equipment. It is not compatible with standard lighting circuits or circuits rated below 45 Amps.
Care: To maintain the appearance of the brushed copper finish, clean the switch plate with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or polishing agents, as these can damage the finish. For deeper cleaning, a mild soap solution can be used, followed by a rinse with a clean, damp cloth and thorough drying.
