Diall Black Anti-Slip Tape - L 15M, W 25mm

Prevents accidental downfall or gliding on smooth and sloppy surfaces. This tape is designed for s...

Best current price£16.50from B&Q

One Offer

1 offer from £16.50

View price history by clicking the chart icon.

B&QB&Q - Black Anti-Slip Tape (L)15M (W)25mm
Free delivery in 1–3 days
£16.50
Visit shop

Product Information

Full details

The Diall Black Anti-Slip Tape is designed for anyone needing to enhance safety and prevent slips on smooth or wet surfaces. Its primary benefit is providing a secure, non-slip grip, crucial for high-traffic areas or potentially hazardous zones. A caveat to consider is its specific application for surface grip enhancement, not as a general adhesive for bonding materials. This tape offers a simple yet effective solution for safety, featuring a durable design and ample length for various applications.

All features

BrandDiall

Extended Product Information

FAQs

What surfaces can this tape be applied to?

The tape is suitable for most smooth, clean, and dry surfaces including wood, tile, concrete, metal, and linoleum. It is best for flat or gently curved areas.

Is the tape waterproof?

The tape is designed to provide grip even on wet surfaces, but prolonged submersion or constant exposure to standing water may affect its adhesion over time.

How long will the tape last?

Durability depends on the application and foot traffic. Under normal conditions, it provides long-lasting grip. Regular inspection and maintenance will extend its effective lifespan.

Can I remove the tape if needed?

The tape can be removed, but residue may be left behind, especially on painted or delicate surfaces. Gently heat the tape with a hairdryer to soften the adhesive before peeling. A solvent may be needed to clean up any residue.

What is the difference between anti-slip tape and grip tape?

While similar, 'anti-slip tape' specifically emphasizes preventing accidental slips due to wetness or smoothness, often used on stairs and floors. 'Grip tape' can also refer to surfaces designed for enhanced hand or foot grip, such as on sports equipment.

Can this tape be used outdoors?

Yes, the tape is designed for both indoor and outdoor use, providing enhanced traction in various weather conditions.

Troubleshooting

Tape is not sticking well

Ensure the surface is thoroughly cleaned, dried, and free of dust, oil, or any residues before application. Reapply firm pressure across the tape, especially along the edges.

Air bubbles under the tape

Carefully lift the edge of the tape where the bubble is located and reapply, smoothing from the center outwards. For existing bubbles, you may be able to prick them with a fine needle and press the air out.

Tape is peeling at the edges

This can happen with heavy use or moisture exposure. Ensure all edges are pressed down firmly. For persistent lifting, consider using a small amount of appropriate adhesive or replacing the section.

Difficult to cut to size

Use sharp scissors or a utility knife. Applying gentle heat from a hairdryer before cutting may make the tape more pliable and easier to cut cleanly.

Pros and Cons

Pros

  • Significantly improves safety by reducing slip hazards.
  • Long length provides excellent value and coverage.
  • Durable material designed for longevity in various conditions.
  • Simple to install without special tools.

Cons

  • Primarily for safety grip, not for heavy-duty structural adhesion.
  • May require careful application on curved surfaces.
  • Surface preparation is crucial for optimal adhesion.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and free from dust, grease, or debris.
  2. Cut the tape to the desired length using scissors or a utility knife.
  3. Peel back a small section of the backing paper.
  4. Carefully align the tape with the edge of the surface and press down the exposed adhesive.
  5. Gradually peel off the backing paper while firmly pressing the tape onto the surface, working from the center outwards to avoid air bubbles.
  6. For best adhesion, apply firm pressure across the entire surface of the tape, especially on the edges.

Compatibility:

This tape is compatible with most common indoor and outdoor surfaces including wood, tile, concrete, metal, and linoleum, provided they are clean and smooth. It is best suited for flat or gently curved surfaces.

Care:

Clean the tape with a damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the tape's surface or adhesive. Regularly inspect the tape for any signs of lifting or wear and reapply pressure or replace as needed.

Price History

DatePrice
Visit shop