Shopping.co.uk

Infinity Wax Heavy Cutting Compound - 250mL

Infinity Wax Heavy Cutting Compound - 250mL

Infinity Wax Heavy Cut Compound with Diminishing Abrasives is a professional-grade solution design...

Best current price£14.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£14.99Visit shop

Infinity Wax - Infinity Wax Cut Heavy Compound |250ml |Reduces Holograms

Visit shop

All Offers

9 offers from £14.99 - £153.59

View price history by clicking the chart icon.

eBayInfinity Wax - Infinity Wax Cut Heavy Compound |250ml |Reduces Holograms
Free delivery in 1–3 days
£14.99
Visit shop
My Motor WorldInfinity Wax Heavy Cutting Compound 250Ml
Free delivery in 1–3 days
£24.99
Visit shop
B&Q - 4X Infinity Wax Heavy Cutting Compound 250Ml High Cut Paintwork Scratch Remover
Free delivery in 1–3 days
£102.39
Visit shop

Product Information

Full details

Infinity Wax Heavy Cutting Compound is designed for professional detailers and automotive enthusiasts who need a reliable solution for aggressive paint correction. Its primary benefit lies in its diminishing abrasive technology, which provides a high initial cut to remove severe defects while refining the surface as you work, though it requires a careful post-correction polishing step to achieve a show-car gloss.

All features

Model Part NumberIFW320
BrandInfinity Wax

Extended Product Information

FAQs

Can this compound be used by hand?

While it is designed primarily for machine use, it can be used by hand for spot repairs with a firm foam applicator, though results will be less efficient.

Does it contain silicone or fillers?

No, it is designed for true paint correction rather than temporary filling.

Do I need to wash the car after using this?

A thorough wipe-down with an IPA solution or a wash is recommended to remove residue before applying wax or sealant.

Is it safe for ceramic coated cars?

This is a heavy cutting compound that will strip off existing waxes or coatings. Only use it if you intend to re-apply a protective layer afterward.

What pad type is best?

Microfiber cutting pads or firm foam pads provide the best balance of cut and finish for this compound.

Troubleshooting

Excessive dusting during polishing

Reduce the amount of product used per section and ensure you are not over-working the compound once the abrasives have fully broken down.

Compound is difficult to wipe off

You may be using too much product; try using a smaller amount and ensure the surface is cool to the touch before starting.

Hazing remains after use

This is normal for heavy compounds; follow up with a light finishing polish and a soft finishing pad to restore full gloss.

Pros and Cons

Pros

  • High initial cutting power for quick defect removal
  • Easier cleanup due to water-based formulation
  • Reduces the need for multiple stages on moderate defects
  • Consistent performance across different paint types

Cons

  • May require a secondary fine polish for total clarity
  • Not intended for light swirl removal or final gloss enhancement
  • Requires proper surface preparation to avoid cross-contamination

Setup, Compatibility & Care

  • Compatibility: Compatible with all standard automotive clear coats and single-stage paints. Use with rotary or dual-action polishers.
  • Setup: Ensure the vehicle surface is thoroughly washed and decontaminated using a clay bar before application to prevent debris from causing deeper scratches.
  • Care: Always store the bottle in a cool, shaded environment. Ensure the cap is tightly sealed to prevent evaporation of the water-based suspension. If the product dries out on the pad, mist the pad with a small amount of distilled water or pad primer to reactivate the abrasives.

Price History

DatePrice
Visit shop