Best current price£38.22from B&Q
Shopping.co.uk recommended and popular offers
B&Q£38.22Visit shop B&Q - Precision Glue 7.5G (5G + 50% Free12 Pack)Fast-Acting Clear Multipurpose Adhesive With Long Nozzle For Diy Repairs
Visit shop3 offers from £38.22 - £51.82
View price history by clicking the chart icon.
This 12-pack of Loctite Precision Glue is ideal for frequent DIYers, crafters, and workshops needing a reliable, fast-acting adhesive. Its key benefit is the long precision nozzle for accurate, mess-free application on small surfaces. A minor caveat is that cyanoacrylate glues require careful handling and are not suitable for all material types.
| Colour | White |
|---|---|
| Brand | Loctite |
While the bond sets in seconds, full curing can take up to 24 hours, after which the bond reaches its maximum strength.
It can bond some fabrics, particularly synthetic ones, but it may result in a stiff bond. It is not ideal for soft, flexible fabric applications.
Unopened, the glue typically has a shelf life of 1-2 years when stored properly. Once opened, its shelf life is reduced, and it's best used within a few months.
The cured adhesive offers some resistance to water, but it is not fully waterproof. Prolonged exposure to moisture may weaken the bond over time.
For non-porous surfaces, try gently scraping with a razor blade or using acetone-based removers. For painted surfaces, test removers in an inconspicuous area first as they can damage paint.
It is named 'Precision Glue' due to its long, narrow nozzle designed for accurate and controlled application, allowing users to apply small amounts of adhesive exactly where needed.
Ensure the cap is removed and the nozzle is not clogged. If clogged, carefully try to clear it with a fine needle or pin. Check that the tube is not empty.
Ensure surfaces were clean, dry, and free from contaminants. Reapply and ensure sufficient pressure is applied during the initial bond time. Check if the materials are compatible with cyanoacrylate glue.
Do not force skin apart. Soak the bonded area in warm, soapy water. Gently peel or roll the skin apart using a blunt edge like a spoon handle. Acetone (nail polish remover) can help dissolve the glue on skin, but use with caution and rinse thoroughly afterwards.
This can happen with excessive glue application or in humid conditions. Try applying a thinner layer in a drier environment for a clearer finish.
Setup: No complex setup is required. Ensure the surfaces to be bonded are clean, dry, and free from grease or dust. Apply a thin layer of glue to one surface and press the parts together firmly. Hold for approximately 15-60 seconds until the bond sets.
Compatibility: Suitable for bonding plastic, wood, metal, rubber, leather, ceramic, and general household materials. *Avoid* using on polystyrene, polyethylene, or PTFE plastics. Always test on an inconspicuous area first if unsure.
Care: Store tubes in a cool, dry place away from direct sunlight and heat. Keep the cap tightly sealed after each use to prevent the nozzle from clogging and the glue from drying out. Clean the nozzle tip with a dry cloth if any dried glue appears. Ensure good ventilation when using.
