Humbrol Precision Poly Cement - Solvent Based - 20ml

This cement is specifically designed for plastic model kits, including polystyrene and ABS plastics.

The cement is surface dry in 10-20 minutes and fully dry in 1 hour.

If the cement is not fully dry, you can re-dissolve it with Liquid Poly or more Poly Cement. Once dry, it creates a permanent bond.

Store the cement in a cool, dry place and keep the tube tightly closed.

The shelf life can vary, but proper storage helps maintain the cement's quality. If the cement thickens, it may be nearing the end of its useful life.

Wipe the applicator tip with a clean cloth or paper towel after use.

This is a solvent-based product and should be used in a well-ventilated area. Avoid contact with skin and eyes. Keep out of reach of children.

Ensure both surfaces are clean and free of debris. Apply a sufficient amount of cement and hold the parts firmly together until they are surface dry.

Work in a cooler environment or apply the cement in smaller increments. Ensure the cap is securely fastened after each use.

Ensure the product is stored properly. If the cement has thickened, it may be nearing the end of its useful life.