conecto Ceiling Mount for Projector - SA-CC50280-V2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The conecto Ceiling Mount for Projector (SA-CC50280-V2) is designed for users seeking a secure and flexible mounting solution for their projectors. It offers full adjustability for optimal viewing angles and a clutter-free setup, with a key benefit being its robust aluminium construction and ease of assembly. A potential caveat is that compatibility is strictly determined by VESA mount and projector weight, not solely by display format.
All features
| Model Part Number | SA-CC50280-V2 |
|---|---|
| Brand | conecto |
Extended Product Information
FAQs
What is the maximum weight capacity of this projector mount?
The conecto Ceiling Mount for Projector SA-CC50280-V2 has a maximum load capacity of 13.5 kg.
What VESA sizes does this mount support?
This mount universally supports VESA 75x75mm and 100x100mm hole patterns.
How close does the projector sit to the ceiling?
The ceiling clearance is 15 cm.
Can I rotate the projector 360 degrees with this mount?
Yes, the mount allows for 360° swivel and 360° rotation of the projector.
Is the mounting hardware included?
Yes, all necessary mounting material is included with the projector mount.
What material is the mount made of?
The mount is constructed from durable, premium quality aluminium.
How do I clean the mount?
Use a soft, damp cloth to clean the mount. Avoid abrasive cleaners.
Troubleshooting
Projector is not stable after mounting
Ensure all screws and bolts are securely tightened. Check that the VESA pattern and weight of your projector are within the mount's specifications. Verify the ceiling mounting is secure.
Difficulty adjusting the tilt or swivel angle
Loosen the adjustment screws slightly to allow movement, then re-tighten them firmly once the desired position is achieved. Ensure no cables are obstructing the movement.
Mounting holes on projector do not align with mount
Double-check your projector's VESA pattern. This mount supports 75x75mm and 100x100mm. Verify the maximum hole spacing on your projector does not exceed 32 cm. If VESA is incompatible, this mount may not be suitable.
Installation guide is unclear
Refer to the illustrated diagrams and pictograms within the guide. Ensure you are following the sequence of steps precisely. If issues persist, consult online resources for VESA mounting best practices.
Pros and Cons
Pros
- Offers extensive adjustability for perfect viewing angles.
- Durable and high-quality aluminium build.
- Easy installation with comprehensive instructions and included parts.
- Low profile design minimizes ceiling intrusion.
- Wide compatibility with standard VESA patterns.
Cons
- Maximum load capacity of 13.5 kg may not suit very heavy projectors.
- Ceiling clearance of 15 cm might be too low for some aesthetic preferences.
- Compatibility is strictly based on VESA and weight, requiring user verification.
- Only one specific model (SA-CC50280-V2) is detailed here; other variants may differ.
Setup, Compatibility & Care
Setup: The mount comes with all required mounting hardware and a clear, illustrated installation guide. Ensure you have the necessary tools (e.g., drill, screwdriver). Follow the step-by-step instructions, paying close attention to the diagrams. The guide includes a table of contents for easy navigation.
Compatibility: Compatibility is determined by your projector's VESA mounting pattern (75x75mm or 100x100mm supported by this mount) and its weight. The projector must not exceed the 13.5 kg load capacity. The maximum hole spacing on the projector for attachment to the mount is 32 cm.
Care: Clean the mount with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they can damage the aluminium finish. Periodically check that all screws and fittings remain tight to ensure continued stability and safety.