Integral Compact Flash Card - 16GB

The 16GB Integral CompactFlash card uses the FAT32 file format.

It offers high transfer speeds suitable for many video formats. However, for very high-bitrate 4K or 8K video, always check your camera's specific media requirements for minimum write speeds.

CompactFlash Type I refers to the physical standard and dimensions of the card. It is thinner than Type II cards and is the most common format for digital cameras.

Use a soft, dry, lint-free cloth to gently wipe the metal contacts. Avoid using water, solvents, or abrasive materials.

The Integral 16GB CompactFlash card comes with a 5-year manufacturer's warranty.

While the description mentions 'CFast' in specifications, the primary form factor is CompactFlash Type I. CFast is a different standard. Ensure your device has a CompactFlash Type I slot, not a CFast slot.

The '100x' speed designation is an older standard often correlating to approximately 15MB/s. While specific speeds can vary, it indicates a significantly faster transfer rate than older memory card technologies.

Ensure the card is fully inserted and the camera is powered off before inserting. Try cleaning the card's contacts with a dry cloth. Test the card in another compatible device if possible. Format the card in the camera if it's new or has been used in another device.

Check if the card is full. Try formatting the card in the camera (this will erase all data). Ensure the write-protect tab on the card (if applicable to older CF formats, though typically not on Type I) is not engaged.

Ensure the device's firmware is up-to-date. Avoid using the card for tasks other than photography if performance is critical. Consider using a higher-speed card reader. If errors persist, the card may be nearing the end of its lifespan or be defective.