Best current price£22.16from eBay
Shopping.co.uk recommended and popular offers
eBay£22.16Visit shop Farecla G3 Advanced Liquid Compound 500ml & G10 Rubbing Compound 500ml
Visit shop4 offers from £22.16 - £30.48
View price history by clicking the chart icon.
The Farecla G3 and G10 kit is an ideal surface restoration solution for automotive detailers and DIY enthusiasts looking to restore paintwork to a showroom standard. This two-part system combines a heavy-duty cutting compound to eliminate sanding marks and a fine-grade polish to achieve a mirror-like finish; however, it requires proper technique and a dual-action or rotary polisher to prevent burning through clear coats during the abrasive G3 application phase.
| Model Part Number | Farecla G3 500ml + G10 500ml |
|---|---|
| Brand | Farecla |
While technically possible for small spot repairs, these products are designed for machine polishing and will yield significantly better results with a rotary or dual-action polisher.
No, you do not need to wash the car, but you must ensure all residue is thoroughly wiped off with a clean microfiber cloth before applying the G10 compound.
No, using these compounds will remove any existing wax, sealant, or ceramic coating. You will need to re-apply your preferred protection product after the polishing process is complete.
No, these compounds are designed to level the surface of the clear coat. If a scratch is deep enough to reach the color coat or primer, it cannot be removed with polishing compounds.
Use a firm compounding pad (foam or wool) for the G3 stage and a soft, fine-cell foam finishing pad for the G10 stage.
Use a fine mist of water to re-activate the compound or reduce the pressure/speed of the machine polisher.
Ensure the polishing pad is clean and use a slower, more controlled movement to ensure the fine abrasives properly break down.
Use a slightly damp microfiber towel to soften the residue before buffing it away with a dry, clean cloth.
To achieve professional results, ensure the vehicle surface is thoroughly cleaned and decontaminated using a clay bar before applying any compound. Use a clean microfiber cloth for removal between stages to prevent cross-contamination of grit. Store both bottles in a cool, dry place away from direct sunlight, ensuring the caps are tightly sealed to prevent the product from drying out. These compounds are compatible with most standard foam and wool polishing pads, though it is recommended to dedicate specific pads to each compound to maintain the integrity of the finish.
