Best current price£3.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£3.99Visit shop Case Corner Braces 28Mm (1 1/8 Inch) Brass Plated With Screws Pack Of 4 5057670086495
Visit shop
B&Q£7.99Visit shop - Case Corner Braces 28mm (1 1/8 Inch) Brass Plated With Screws Pack Of 4
Visit shop3 offers from £3.99 - £7.99
View price history by clicking the chart icon.
Designed for DIY enthusiasts and furniture restorers, these 28mm bronze-finish case corner braces provide essential structural reinforcement for chests, boxes, and small cabinetry. They offer an elegant, vintage aesthetic while ensuring rigid corner integrity, though users should note that the bronze finish is decorative and best suited for interior applications rather than heavy-duty outdoor exposure.
| Colour | Bronze |
|---|---|
| Brand | B&Q |
Yes, the pack is designed as a complete set including the necessary mounting screws for all four braces.
These are primarily for indoor use. Outdoor conditions may cause the bronze finish to tarnish or oxidize rapidly.
A manual screwdriver is sufficient. A drill with a small bit is recommended for creating pilot holes to protect the wood.
They are designed for reinforcement and aesthetic purposes, not for supporting significant structural loads.
The braces are 28mm in size, measured along the sides of the angle.
Ensure you are using the correct size Phillips head screwdriver and apply firm, downward pressure while turning.
Verify that the wood surfaces were properly joined and glued before adding the brace; the brace is intended to hold the position, not pull a large gap together.
To install, ensure your surface is clean and level. Align the brace flush against the corner of your unit. Use a small pilot hole before driving the provided screws to prevent the wood from splitting, especially near the edges. For maintenance, keep the bronze finish looking new by occasionally wiping with a soft, dry cloth; avoid using harsh chemical cleaners or abrasive scouring pads, as these will strip the decorative finish. Ensure that the thickness of your wood panels is at least 10mm to prevent screws from protruding through the opposite side.
