Best current price£177.42from eBay
Shopping.co.uk recommended and popular offers
eBay£177.42Visit shop 1x 6mm High Pressure LPG Gas Hose Heating Accessories 50m Roll - GAS39
Visit shop
B&Q£196.63Visit shop B&Q - Gas Hose 6 mm X 50 M Roll 1/4" Gas39 Qty 1
Visit shop4 offers from £177.42 - £211.46
View price history by clicking the chart icon.
The Mehr High Pressure LPG Gas Hose (GAS39) is engineered for industrial and workshop professionals who require a safe, compliant, and durable transport line for propane and butane. Featuring a 6 mm diameter and a generous 50-meter length, it provides consistent performance for heating and gas-fired equipment while adhering to rigorous safety standards. While ideal for heavy-duty applications, users should note that this hose requires compatible 1/4 inch fittings and professional installation to ensure a leak-proof seal for high-pressure systems.
| Model Part Number | GAS39 |
|---|---|
| Brand | Mehr |
No, this is a 50-meter bulk hose roll. Fittings must be purchased separately to match your specific gas equipment.
This hose is specifically designed for LPG (Propane/Butane) applications. Check your local regulations before using with natural gas.
The Mehr GAS39 meets the BS3212: 1991/2/4,8 standards.
While it is a high-pressure hose, it can be used for low-pressure applications provided the proper regulators and compatible fittings are used.
Store the hose in a dry, dark place at room temperature, away from chemicals and direct sunlight, to prevent material degradation.
Verify that you are using 1/4 inch NPT or BSP fittings and re-tighten. If the hose end is damaged, trim 2 inches off and re-attach.
Immediately shut off the main gas supply. Inspect the seal and re-apply approved thread sealant or replace the fitting if it shows signs of wear.
Ensure the hose is not bent at a radius tighter than the manufacturer's recommended minimum. Use hose guides if necessary.
To ensure maximum safety, always inspect the hose for kinks, cracks, or abrasions before installation. Use only compatible 1/4 inch brass or stainless steel fittings to secure the connections. When cutting the hose from the 50-meter roll, use a dedicated hose cutter to ensure a square, clean edge, which prevents gas leaks.
Once installed, perform a bubble leak test at every connection point using a soapy water solution to confirm the seal is airtight. For care, keep the hose clean of oil, grease, and industrial solvents, as these can degrade the rubber compound over time. Store the remaining roll in a cool, dark, and dry area away from direct sunlight.
