Best current price£263.36from eBay
Shopping.co.uk recommended and popular offers
eBay£263.36Visit shop Shimano Deore XT Di2 RD-M8050 Rear Derailleur 11Speed Medium Cage GS Electr
Visit shop1 offer from £263.36
View price history by clicking the chart icon.
The Shimano Deore XT RD-M8050 Di2 rear derailleur is designed for serious mountain bikers looking for consistent, high-performance electronic shifting that thrives in challenging trail conditions. By replacing traditional cables with Digital Integrated Intelligence (Di2), riders benefit from effortless gear changes that never suffer from cable stretch or environmental contamination; however, users must be prepared to manage a battery-powered ecosystem and perform occasional firmware updates.
| Model Part Number | RDM8050GS |
|---|---|
| Brand | Shimano |
No, the RD-M8050-GS is specifically designed for Shimano 11-speed systems.
Yes, you can adjust multi-shift speed and intervals using the Shimano E-Tube software interface.
The component is highly weather-sealed for trail use, but you should avoid direct high-pressure water streams at connections.
Yes, this requires a compatible Shimano Di2 battery integrated into your frame or seatpost.
Limit adjustments are performed using the physical limit screws on the derailleur body, similar to mechanical models, while the electronic indexing is handled via software.
The GS medium cage provides the correct geometry for 1x11 or 2x11 setups to maintain optimal chain tension.
Check battery charge levels and ensure all E-Tube wire connections are firmly seated in their ports.
Connect the system to the E-Tube software to recalibrate the derailleur position and check for any pending firmware updates.
Inspect wires for physical damage or sharp bends and ensure they are properly routed without tension.
Installation requires the Shimano E-Tube wiring harness and an internal or external battery source. Unlike mechanical derailleurs, you must use the E-Tube software (via PC connection or mobile app) to perform the initial setup and limit adjustments. Ensure all electrical connections are fully seated until they click. For maintenance, periodically check the firmware status of the component. While the unit is highly weather-resistant, avoid using high-pressure water spray directly at the wire connection ports to preserve the seals.
