Klein Tools Linesman Pliers - D201-7CSTA
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
For ironworkers and construction professionals, Klein Tools Ironworker's Pliers (D201-7CSTA) offer a robust solution for twisting and cutting rebar tie wire, providing a strong grip and durability. A key benefit is their spring-loaded, self-opening action that reduces fatigue. However, it's crucial to remember these are not insulated tools and should not be used around electrical hazards. This guide covers their features, use, and maintenance.
All features
| Model Part Number | D201-7CSTA |
|---|---|
| Brand | KLEIN TOOLS |
Extended Product Information
FAQs
What type of wire are these pliers designed for?
These pliers are specifically designed for twisting and cutting soft annealed rebar tie wire.
Are these pliers insulated for electrical work?
No, these are NOT insulated tools. They should never be used near live electrical circuits or for any application involving electricity.
How does the spring-loaded action benefit me?
The spring-loaded, self-opening design reduces the effort needed to operate the pliers, minimizing hand fatigue during repetitive tasks like tying rebar.
How do I maintain the cutting blades?
The cutting knives are induction hardened for durability. Over time, they may require sharpening. Use a sharpening stone or file suitable for tool steel. Always wear eye protection when sharpening.
Can these pliers be used for other types of wire or cable?
While they might cut other soft wires, they are optimized for rebar tie wire. Using them for harder or larger gauge wires may damage the blades or mechanism and is not recommended.
What does 'exclusive handle tempering' mean?
This refers to a specific heat-treating process applied to the handles that helps absorb the shock or 'snap' generated when cutting wire. This improves user comfort and contributes to the tool's overall durability.
Where are these pliers manufactured?
These pliers are forged in the USA with custom, US-made tool steel.
Troubleshooting
Pliers won't cut wire cleanly
Ensure the wire is properly positioned against the cutting knives at the hinge. The knives may need sharpening if they are dull. Check for any debris lodged in the cutting mechanism.
Spring-loaded action feels stiff or won't open
Clean the pivot area and apply a light lubricant to the hot-riveted joint. Ensure no debris is obstructing the spring mechanism.
Grip feels weak or slips
Clean the knurled jaw surface to remove any grease or dirt. Ensure you are using the correct type of wire (soft annealed rebar tie wire) as intended for the tool.
Handles are wobbly
The hot-riveted joint may have loosened. This type of joint is typically not user-serviceable and may require replacement of the tool if the wobble significantly impacts performance.
Rust is present on the jaws or blades
Gently remove surface rust with fine-grit sandpaper or steel wool. Clean the tool thoroughly and apply a light coat of oil to prevent further rusting. Store in a dry location.
Pros and Cons
Pros
- Efficiently twists and cuts rebar tie wire.
- Strong grip provided by aggressive knurl.
- Reduces user fatigue with spring-loaded action.
- Durable construction for heavy-duty use.
- Induction hardened blades for long-lasting sharpness.
- Smooth operation due to hot-riveted joint.
Cons
- Not insulated; not suitable for electrical work.
- Designed specifically for rebar tie wire, may not be optimal for other wire types.
- Can be heavier than multi-tools without these specialized functions.
- Requires manual sharpening of cutting edges over time.
- Plastic handle grips may wear down with extensive use in harsh conditions.
- Potential for rust if not properly maintained and stored.
Setup, Compatibility & Care
Setup: These pliers require no initial setup. They are ready for use straight out of the packaging.
Compatibility: Primarily designed for use with soft annealed rebar tie wire. They are not intended for use with insulated electrical wiring or high-tensile strength cables.
Care: To ensure longevity and optimal performance:
- Cleaning: After each use, wipe the pliers clean of dirt, debris, and moisture using a dry cloth. A slightly damp cloth can be used for stubborn grime, but ensure the tool is thoroughly dried afterward.
- Lubrication: Periodically apply a light coat of lubricating oil (like 3-in-One oil or mineral oil) to the hot-riveted joint to maintain smooth operation and prevent rust.
- Rust Prevention: Store the pliers in a dry environment. If rust spots appear on the jaws or blades, gently remove them with fine-grit sandpaper or steel wool, then re-lubricate.
- Blade Maintenance: While induction hardened, the cutting knives may eventually require sharpening. Use a sharpening stone or file designed for tool steel to maintain their cutting edge. Always wear approved eye protection when sharpening.
- Handle Care: Wipe the plastic handles with a damp cloth to clean. Avoid using harsh solvents that could degrade the plastic. Inspect handles periodically for cracks or damage.