Blum Tip-On Push-To-Open Set - Silver

This set is specifically designed for cabinet doors over 1300 mm in height.

It is intended for use with un-sprung hinges or hinges that have a spring (latch). It is not recommended for standard sprung hinges without a latch mechanism.

The Tip-On unit offers an adjustment range of +4mm / -1mm for fine alignment of the cabinet door.

The 'output path' refers to the distance the piston extends (38 mm), and the 'trigger way' is the minimal distance the door needs to be pushed to activate the mechanism (1.5 mm).

Yes, the set is supplied with the necessary adapter plate, Tip-On unit, magnetic plate, and mounting screws.

Clean the Tip-On set using a soft, damp cloth. Avoid using abrasive cleaners or solvents.

Check that the Tip-On unit and magnetic plate are correctly aligned and securely mounted. Ensure the trigger distance is appropriate. Verify compatibility with your hinges.

Ensure the magnetic plate has sufficient contact with the Tip-On piston. Adjust the position of the magnetic plate or the Tip-On unit for better engagement. Check if the hinges are providing adequate closing pressure.

Utilize the +4mm / -1mm adjustment feature on the Tip-On unit to fine-tune the door's position until it is flush with adjacent doors or panels.

Ensure the unit is clean and free from debris. Check for any obstructions that might be hindering the piston's movement. Avoid over-tightening mounting screws.