Best current price£7.45from The Range
Shopping.co.uk recommended and popular offers
The Range£7.45Visit shop Unifix Brass Woodscrews Slotted Round Head 2G X 3/8" (2.0 X 10Mm) - 9Tqrndbws/006 - Box Of 200 - Grey
Visit shopThe Range£8.17Visit shop Unifix Brass Woodscrews Slotted Round Head - 3G X 1/2" (2.5 X 12Mm) - 9Tqrndbws/021 - Box Of 200 - Grey
Visit shop40 offers from £7.45 - £41.31
View price history by clicking the chart icon.
Unifix Brass Woodscrews are ideal for DIY enthusiasts and professionals needing durable fasteners for various wood projects. Their high-quality brass construction ensures longevity and resistance to corrosion, offering reliable performance. A potential caveat is that the slotted head may not be compatible with all modern power drivers, requiring manual or specific slotted driver use.
| Model Part Number | 9Tqrndbws/006 |
|---|---|
| Brand | Unifix |
Unifix Brass Woodscrews are suitable for all types of wood, including softwoods and hardwoods. Pre-drilling is recommended, especially for harder woods or when fastening near the edge of a board.
Yes, you can use a power drill, but it is advisable to use a low torque setting and a clutch to prevent over-driving and stripping the screw head. Manual driving often provides better control for brass screws.
Ensure you are using a screwdriver with a blade that fits the slot precisely. Apply firm, consistent downward pressure while turning. Pre-drilling a pilot hole can also reduce the resistance and the likelihood of cam-out.
Yes, the brass material offers good resistance to corrosion, making them suitable for many outdoor applications. However, for prolonged exposure to harsh weather, consider stainless steel screws.
Brass screws offer excellent corrosion resistance and a pleasing aesthetic, making them ideal for visible applications or environments where moisture is present. They are also non-magnetic.
Store the screws in their original box in a cool, dry place, away from excessive humidity, to prevent tarnishing or corrosion.
The '2G' typically refers to the gauge or diameter of the screw, approximately 2.0mm in this case. The '3/8"' refers to the length of the screw, which is 3/8 of an inch or about 10mm.
Ensure you are using the correct size slotted screwdriver and that it fits snugly. Pre-drill a pilot hole in the wood. Use a manual screwdriver for better control, or a power drill on a low torque setting.
Check that the pilot hole is drilled straight and is the correct size for the screw shank. Ensure the screwdriver is aligned perpendicular to the screw head and the wood surface.
Pre-drill a pilot hole that is slightly smaller than the screw's minor diameter. For hardwoods, a pilot hole closer to the screw's major diameter may be necessary. Avoid driving screws too close to the edge of the wood.
Verify that the 2G x 3/8" (2.0 x 10mm) size is appropriate for the thickness of the materials you are joining. Select screws that penetrate the second piece of wood by at least half its thickness.
Setup: These screws are ready for immediate use. Ensure you select the appropriate size screwdriver (a flathead or slotted driver that fits snugly into the screw's slot) to prevent stripping. For best results, pre-drilling a pilot hole, especially in hardwoods, is recommended to prevent wood splitting and ease insertion. Drive the screw until it is flush or slightly countersunk, depending on your project's aesthetic requirements.
Compatibility: Unifix Brass Woodscrews are designed for use in all types of wood. The slotted head is compatible with standard flathead screwdrivers. While they can be driven with a power drill using a manual clutch setting, care must be taken to avoid over-driving, which can damage the screw head or the wood.
Care: Store screws in their original box in a dry environment to prevent tarnishing or corrosion. Clean any dust or debris from the screws before use. Due to the softer nature of brass compared to steel, avoid using excessive force during installation to prevent stripping the head.
