Aniplast Bathtub Drain Waste Trap Set - Stainless Steel

Remove the strainer and rinse it under running water. Use a small brush to remove any trapped debris.

Use a mild, non-abrasive cleaner designed for stainless steel. Avoid harsh chemicals or abrasive materials.

Regularly clean the strainer to catch hair and debris. Avoid flushing large objects down the drain.

Check all connections and tighten them. Use plumber's tape on threaded connections to ensure a watertight seal. Ensure all seals are properly seated.

It is designed for standard bathtub drain sizes. Measure your drain opening to confirm compatibility before installation.

With proper care and maintenance, the stainless steel drain set should provide years of reliable service.

Remove the strainer and clean out any hair or debris that may be obstructing the drain. Also, check the trap for any blockages.

Tighten all connections, including the strainer and overflow pipe. Ensure the rubber seals are properly seated. Use plumber's tape on threaded connections.

Check the plug for any damage or wear. Ensure it fits snugly into the drain opening. Clean the drain opening to remove any debris preventing a tight seal.