Best current price£39.52from B&Q
Shopping.co.uk recommended and popular offers
B&Q£39.52Visit shop B&Q - Cleco Temporary Fasteners 3/16" Rivets Pins (10) Pliers And 2 Metal Edge Clamps
Visit shop2 offers from £39.52
View price history by clicking the chart icon.
The Cleco Temporary Fasteners Kit is an essential toolset for automotive restorers, bodywork professionals, and metal fabricators who require precise, temporary panel alignment before permanent welding or bonding. By utilizing professional-grade pins and edge clamps, users can securely hold sheet metal without the bulk of traditional clamps, though it does require the initial step of drilling small pilot holes into the workpiece.
| Model Part Number | CLECO_KIT_GOLD |
|---|---|
| Brand | AB Tools |
These are designed specifically for sheet metal panels. Using them on thicker materials or non-metal surfaces may damage the pins.
A standard drill with a high-quality 3/16 inch metal bit is sufficient.
Yes, they are designed for repeated insertion and removal throughout the duration of your project.
The edge clamps have a throat depth of 1 inch (25mm).
Yes, Cleco fasteners are the industry standard for temporary fastening in both aviation and automotive sheet metal work.
Verify the hole diameter is exactly 3/16 inch; a hole that is too large will not allow the pin's spring-loaded foot to fully expand.
Check for debris inside the plier pivot or check the Cleco pin for bent spring wires that may be causing binding.
To ensure the longevity of your kit, keep the Cleco pins and pliers clean and free of metal filings or rust-promoting debris. After finishing a session, wipe the tools with a light machine oil to maintain the spring mechanism's smoothness. Compatibility is specific to the 3/16 inch hole size; ensure your drill bits are sharp to prevent burring, which could make inserting the pins difficult. Always store the pliers in a dry environment to protect the rubberized grips from degradation. Before beginning, always verify that your sheet metal thickness is compatible with the 1/2-inch opening of the edge clamps to prevent over-extension of the springs.
