Best current price£7.99from eBay
Shopping.co.uk recommended and popular offers
eBay£7.99Visit shop VOLEX ACCESSORIES - 20 Amp Double Pole Square Edge Water Heater Switch with Neon
Visit shopeBay£7.99Visit shop Volex 13 Amp Boiler Switched Fused Spur Marked BOILER in Red X1
Visit shop3 offers from £7.99 - £13.66
View price history by clicking the chart icon.
This guide is for electricians and homeowners looking to safely and reliably control a water heater. The Volex Accessories VX1060WH offers a clear, dedicated double-pole switch with a neon indicator for easy identification and operation. A key benefit is the robust construction suitable for various wiring configurations, though it requires professional installation due to its electrical nature.
| Model Part Number | VX1060WH |
|---|---|
| Brand | VOLEX ACCESSORIES |
DP stands for Double Pole. It means the switch disconnects both the live and neutral wires simultaneously, providing a safer isolation than a single pole switch.
Yes, this switch is suitable for any appliance requiring a 20A double-pole switched connection, but it is specifically designed and labelled for water heaters.
The integrated neon indicator on the switch will illuminate when the switch is in the 'ON' position, indicating that power is supplied to the water heater.
The terminals are suitable for 3 x 2.5mm² cables or 2 x 4mm² cables.
Installation should only be carried out by a qualified electrician due to the nature of mains electrical work.
Please refer to the Volex Accessories warranty documentation for specific details on warranty periods and terms.
Typically, the neon indicator in such switches is wired in parallel with the switched live and neutral, so it illuminates when the load is powered. Specific wiring should follow the manufacturer's diagram or an electrician's best practice.
Verify that the circuit is live and the switch is in the 'ON' position. Check wiring connections to the neon indicator terminals. Ensure the bulb is not faulty (though typically non-replaceable).
Confirm that cables are not obstructing the mechanism and that terminal screws are not overtightened. If the issue persists, the unit may be faulty and should be replaced by a qualified electrician.
Check all wiring connections at the switch and the water heater. Ensure cables are securely terminated and meet the specified diameter requirements for the terminals.
Setup: Installation of the VX1060WH must be performed by a qualified electrician in accordance with current wiring regulations. Ensure the main power supply is isolated before commencing any work. The terminals are designed to accept 3x2.5mm² or 2x4mm² cables.
Compatibility: This switch is designed for direct control of water heaters and other high-demand appliances requiring double-pole switching. It is not compatible with dimmer circuits or systems requiring electronic control.
Care: To clean, first ensure the circuit is isolated. Wipe the switch with a dry or slightly damp, soft cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
