Bosch EXPERT X-Lock Diamond Pipe Cut Wheel 125x22.23mm

The Bosch EXPERT X-Lock Diamond Pipe Cut Wheel is suitable for cutting cast iron, composite, hard plastic pipes, non-ferrous metals (such as copper and brass), and fiberglass. Do not use it on aluminum, concrete, or stone.

The disc is designed for long life thanks to its diamond technology. The exact lifespan depends on the material being cut and the frequency of use.

Simply align the disc with the X-LOCK interface on your angle grinder and press it in until it clicks. The disc is then securely locked in place.

Always wear safety glasses, hearing protection, and a dust mask or respirator. Ensure the workpiece is securely clamped. Do not force the cut.

The disc is compatible with angle grinders with an X-LOCK system or a 22.23mm bore for standard locking nut angle grinders.

For X-LOCK, use the release lever on your angle grinder. For standard systems, loosen and remove the locking nut following your grinder's instructions.

This product is available at most hardware stores and online retailers that sell Bosch tools and accessories.

Ensure you are using the correct speed setting on your angle grinder for the material being cut. Check if the disc is compatible with the material. Replace the disc if it's worn or damaged.

Make sure your angle grinder is compatible with the X-LOCK system and that you're following the correct steps for your model. If using a standard locking nut, ensure the nut is properly aligned.

Make sure you're using the disc on the appropriate materials. Ensure proper ventilation and use a dust extraction system if available. If the smell persists, stop cutting and check the disc for damage or suitability for the material.